Inland Surface Water Analysis: A comparative study and their Environmental Impacts in Haryana
Journal Title: International Journal of engineering Research and Applications - Year 2017, Vol 7, Issue 6
Abstract
Water is the most essential basic amenity of human life. Availability of water for domestic as well as commercial purpose is in the two forms i.e. ground water & Inland Surface water. As the percent of fresh water is less so it becomes very important that whatever fraction of water we are utilising it should meet the designated best use of it. In the present paper different regions of Haryana are taken & analysed with respect to physiochemical & Biological parameters given by Central Pollution Control Board (CPCB) directly indicating the designated best use of the water pertaining to different Class along with BIS standards for drinking water. The significance of this study is to get the appropriate notion regarding various Inland surface water utility in different regions of Haryana. The results obtained revealed that the surface water quality varied spatially. Water at most of the locations is not suitable for drinking purposes as per BIS guidelines. It is further suggested that some kind of treatment for TDS is immediately required in the studied areas to avoid water borne health problems in residents.
Authors and Affiliations
Prerna Sharma
Friction and Wear Behavior of Epoxy Composites Reinforced With Ipomoea Carnea Fiber under Dry Condition
This present paper depicts the effect of normal load on the wear (micron) and coefficient of friction of Ipomoea Carnea strengthened/reinforced epoxy composites with various weight % of fiber fraction (10%,20%,30%,40% wt...
Energy Savings In Air Heating Stove Of Tea Plant Using Repetitive Control Strategy
Many of the production costs for producing tea are attributable to the process of drying the tea. Automation of this process can assist companies to reduce these production costs by making crucial information at right ti...
Non Structural Element its Behaviour during an Earthquake
Non structural elements in a building are those members which come in to the path of earthquake force affected by it but do not take part in the dissipation of energy produced during an earthquake. Failure of these membe...
VLSI Modeling of High Performance Aging Aware Multiplier By Using Adaptive Hold Logic Circuit
Digital multipliers are most critical Arithmetic Logic Units. The performance of ALU systems depends on the throughput of the multiplier. In VLSI, the negative bias temperature instability effect occurs when a pmos Trans...
A New Method of Reference Signal Generation Applied To UPQC-PHEV For Grid Integration of WECS-SCIG
In this paper a new reference signal generation control technique is proposed for integration of Unified Power Quality Conditioner (UPQC) with Plug-in Hybrid Electric Vehicle (PHEV) for overcoming voltage sag and other v...