Interface Layer Structure and Properties of Cu / Al Compound Plate
Journal Title: 河南科技大学学报(自然科学版) - Year 2017, Vol 38, Issue 1
Abstract
The Cu / Al composite plate was prepared by twin-roll casting. Peel testing and tensile testing were used to test mechanical properties of Cu / Al composite. The scanning electron microscope( SEM),energy dispersive spectrometer( EDS),transmission electron microscope( TEM) and other instruments were used to analyze the interface layer morphologies,structure and component. The analysis results show that the primary intermetallic compounds in the interface include α-Al and Cu Al2. The peel strength of the composite plate prepared by twin-roll casting can reach to 30 N / mm,and its tensile strength and elongation rate are between Al and Cu in the same size.
Authors and Affiliations
Mingyang CHENG, Aiqin WANG, Zhiping MAO, Kang YANG, Douqin MA
Effect of Flight Forbidden Area on Sector Dynamic Capacity
In order to make use of the aerospace resource reasonably and improve the operational efficiency and safety of air traffic, the sector dynamic capacity was studied. The definition of the flight forbidden area ( FFA) was...
Hybrid Attack Strategy Based on Edge Weight
For the diversification and complexity of current network attack strategy, edge weight as a measure of the importance of edge in complex network was proposed and compared with the traditional edge betweenness measure. Th...
Electric Vehicle Test System of Indoor Bench Test Platform
The response capacity and fast switching ability of the traditional dynamometer platform were poor, which was difficult to directly apply to the new electric vehicle power system testing. Therefore, the indoor bench Labv...
Combined 16S rDNA and gyrB Gene Sequence to Identify a Strain of Bacillus cereus
The strain YSSNJ-005 isolated from the bacillus coagulans was used as objective strain.16 S rD NA and gyrB gene sequence were combined to identify the strain exactly.The results show that the strain YSSNJ-005 is prelimin...
Test of Cold Starting System for Heavy-duty Commercial Vehicle
Aiming at the problems that the data acquisition was not synchronized,the test efficiency was low and the analysis and save of subsequent data were difficult,the scheme of cold start test data acquisition and analysis sy...