Investigating the Stress in the Body of the Flexible Wheel of a Radial Harmonic Transmission
Journal Title: Analele Universitatii "Eftimie Murgu" Resita. Fascicula de Inginerie - Year 2017, Vol 24, Issue 1
Abstract
The paper presents a study of the strains and stress state in the flexi-ble toothed wheel of a radial harmonic transmission, in the case of its deformation by a 2 roller mechanical wave generator. Dynamic research has pursued the numerical simulation of a flexible toothed wheel, in the form of a long circular tube, open at one end, by using the finite ele-ment method and using the SolidWorks Simulation program in elastic range.
Authors and Affiliations
Sava Ianici, Draghiţa Ianici
Keywords
Related Articles
- EP ID EP445113
- DOI -
- Views 85
- Downloads 0
Simple and Multi-collision of an Ellipsoid with Planar Surfaces. Part II: Example
This paper is a complementary one for our previous paper [25]. The collision of the ellipsoid is considered to take place with the main planes of the reference system. In our simulation we obtain the following results: n...
Application of Finite Element Method to Determine the Performances of a Permanent Magnet Synchronous Motor for Driving a Bicycle
In this paper, the authors present a case study in which was analyzed by finite element method a permanent magnet synchronous motor for driving a bicycle using the analysis and simulation software ANSYS Electromagnetics...
Influence of Dyeing/Drying Booths Operating Parameters on the Painted Products Quality
The article proposes an analysis of the dyeing/drying booths (DDB) operating parameters influence on the quality of products and processes that are specific to an economic agent, which has as its object of activi-ties th...
Modal-Based Design Improvement of a Butterfly Valve Disc
The dynamic behavior control of a butterfly valve is important because, when one of the valve disc natural frequency is close to the frequency of vortex shedding, which appears when the valve is fully open or partially...
The Use of Current Generators in Electrical Converter Drives for Stepper Motors
This paper presents some ways to realize electrical converters for step-per motor drives. The first part analyzes aspects for unipolar stepper motor and use of constant current generators. The second part present current...