Investigation and analysis of the possibility of diffusionless phase transformations in the surface layer of a part under the action of grinding temperatures
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 4, Issue 12
Abstract
<p>The possibility of diffusionless phase transformations in the surface layer of the ground part under the influence of instantaneous grinding temperature is investigated and analyzed. This is important because the phase Feα-Feγ transformations that may occur when grinding parts lead to the appearance of so-called grinding burns, which 2-3 times reduce the reliability and durability of the part in the working mechanism. The mechanism of phase transformations, the critical temperature of these transformations and the associated processing modes that provide this temperature are determined. This allows a reasonable approach to the definition of grinding modes and, if necessary, the application of the cooling method. In addition, the problem of optimizing grinding regimes can be solved if the processing performance is taken as a target function, and grinding temperature as a limitation. With rapid surface heating of the hardened steel part by the grinding temperature above the Ac<sub>1</sub> line, there is a reverse martensitic transformation Feα→Feγ. The martensite range during cooling Mn-Mk to a large extent covers negative temperatures. Therefore, austenite is partially fixed in the surface layer, forming a so-called quenching burn. Dependences for determining the formation temperature for steel of any chemical composition<span style="text-decoration: line-through;">,</span> give the possibility to maintain the value of grinding temperature below this level during grinding. The mechanism of diffusionless reverse martensitic transformation in the high-speed surface heating by cutting grains (instantaneous temperature) is considered. The heating rate and the effect of the pressure produced by the abrasive grain on the metal during the chip removal are experimentally determined. Thus, the possibility of diffusionless phase transformation is substantiated and the dependences for the calculation of austenite formation temperatures are given, which in turn provides the opportunity to calculate safe processing regimes</p>
Authors and Affiliations
Ala Bezpalova, Vladimir Lebedev, Natalia Klimenko, Tatiana Chumachenko, Inga Uryadnikova
Keywords
Related Articles
- EP ID EP528137
- DOI 10.15587/1729-4061.2018.140982
- Views 75
- Downloads 0
Research into the impact of structural features of combustion chamber in energy-technological units on their operational efficiency
<p>The experimental studies of the influence of the degree of masonry development (geometry) and aerodynamics of the combustion chambers (circuits of combustion products removal) on the energy-technological indicators of...
Study into the rolling of a double-layered powdered core in a metallic sheath
<p>We have developed an analytical model of the stressed-strained state of the two-layered powdered core in a metal sheath in the deformation zone when fabricating a composite material by rolling. Based on the constructe...
Analysis of inrush currents of the unloaded transformer using the circuitfield modelling methods
<p>We studied theoretically the transition processes that occur during tests of power transformers in the mode of experimental idling. A circuit-field model of electromagnetic processes is developed, based on a three-dim...
Determining the composition of burned gas using the method of constraints as a problem of model interpretation
<p>This paper proposes a method for solving the problem on determining the unknown composition of a gaseous hydrocarbon fuel during its combustion in real time. The problem had been defined as the inverse, ill-posed prob...
Designing the organoplastics based on aromatic polyamide, study of their operational properties and applicability
<p>Polymeric composite materials that are reinforced with organic fibers are characterized by great possibilities in terms of improving the durability of friction nodes in machines and mechanisms. These composites succes...