Investigation of Influence of the Train Motion Speed on the Process of the Rolling Stock Derailment in the Presence of Railway Track Oblique
Journal Title: Український журнал із машинобудування і матеріалознавства - Year 2017, Vol 3, Issue 1
Abstract
The article is aimed to construct the plots of speed range change, at which the necessary and sufficient condition of wheel rolling onto the rail head is satisfied, on the basis of generally accepted methodologies of the wheelset off-loading calculation. First of all, for the specific example, it is necessary to define the value of the train motion speed, at which it takes place the largest wheel off-loading on the curved section of the track with the existing oblique, to determine the minimal height of the oblique, at which the change of the train speed will not lead to the satisfaction of the necessary condition of wheel rolling onto the rail head. One should also construct a generalized scheme of checking the conditions of the rolling stock derailment if there is a railway track oblique of the certain value. In order to determine the influence of the train motion speed on the satisfaction of conditions of the car wheel rolling onto the rail head, it is necessary to solve the system of differential equations that describes the motion of the over-spring part of the rolling stock on the oblique track section under the influence of the forces applied to it. As a result of research carried out, there was obtained the value of train motion speed, at which the largest off-loading of the car wheel on the curved track section with oblique takes place. There was defined the minimal oblique value, at which the change of the train motion speed will not lead to the satisfaction of the necessary condition of the wheel rolling onto the rail head. There were constructed the plots of changing the speed range, at which the necessary and sufficient condition of car wheel rolling onto the rail head is satisfied. In the article, there was constructed the generalized scheme of checking the conditions of the rolling stock derailment if there is a railway track oblique. There were determined the speed ranges, at which the rolling stock derailment may occur if there is a railway track oblique of the certain value. There was defined the value of the train motion speed, at which the largest off-loading of the car wheel on the track curved section with the skew takes place. The obtained dependencies may be used for defining the safe range of the train motion speeds on the track sections with oblique of the certain value. They may be also used while carrying out the forensic railway-transport examinations.
Authors and Affiliations
Andriy Kuzyshyn
Keywords
Related Articles
- EP ID EP248625
- DOI -
- Views 120
- Downloads 0
Choose of optimal regimes of traffic light control in operating zone of pedestrian crossing
On the given stage of motorization level development and increase of traffic flow intensity, with increasing frequency apply to the implementation of intelligent automated systems of traffic control. The quality of their...
Computer 3D modelling of chip geometry and force field in the hobbing process
Nowadays, the main method of machining the gears with a module in the range 1–25 mm, which are integral parts of modern machines, remains hobbing. Operations of the toothed crown processing determine the efficiency of th...
Kinetics of High-Temperature Interaction of Titanium Alloys with a Carbon-Containing Gaseous Medium
Due to their excellent complex of physical, chemical, and mechanical properties, titanium alloys are unique materials for many branches of industry. An important feature of titanium is its high reactivity concerning the...
Thermal Processing of ZR-1 %NB Tube in Oxygen- and Nitrogen Containing Gaseous Mediums
Zirconium alloys have unique properties (physical, mechanical, radiation) is therefore are an essential structural material for nuclear energy. A feature of these alloys is high affinity to the interstitial elements (O,...
Optimization of Conditions of Electroslag Welding of Bandings of Rotary Units
The design of banding shells of rotary units is analyzed. It is shown that combined welding and cast manufacturing of bandings is used in the case of large structural sizes. The basic materials (30, 35, 25 HSL and 30 HML...