Investigation of mechanical properties of MIG-brazed joints of DP600 steel plates using different working angle
Journal Title: Journal of Achievements in Materials and Manufacturing Engineering - Year 2016, Vol 1, Issue 76
Abstract
Purpose: In this study, DP 600 (Dual Phase) steel plates having 1 mm thickness were joined by copper-based (CuAl8) wire in gas metal arc brazing technique. Specimens were prepared in joining forms as overlap joint. Design/methodology/approach: Brazing operations were done with five different working angles of 45°, 50°, 60°, 70° and 80°. CuAl8 wires composed largely of copper serves as the filler metal were used. Having accomplished the brazing operations; tensile properties of joints were detected, and micro and macro-structures of joints were investigated in order to see the joinability of DP 600 steel by gas metal arc brazing technique.
Authors and Affiliations
F. Varol, U. Özsaraç, E. Ferik, S. Aslanlar, V. Onar
Keywords
Related Articles
- EP ID EP190038
- DOI 10.5604/17348412.1228629
- Views 109
- Downloads 0
Microstructure and mechanical properties of the Sanicro 25 steel after ageing
Purpose: The purpose of the research was to determine and analyse the changes in the microstructure and mechanical properties of the Sanicro 25 steel in the as-received condition and after ageing at 600, 650 and 700°C fo...
The corrosion resistance of laser surface alloyed stainless steels
Purpose: of this paper was to examine the corrosion resistance of laser surface alloyed (LSA) stainless steels using electrochemical methods in 1M NaCl solution and 1M H2SO4 solution. The LSA conditions and alloying powd...
Laser treatment with 625 Inconel powder of hot work tool steel using fibre laser YLS-4000
Purpose: The purpose of this investigation was to determine the changes in the surface layer (Inconel 625), obtained during the laser treatment of tool-steel alloy for hot work by the use high-power fibre laser. Design/m...
Surface morphology of wheels in rail vehicles in urban transport
Purpose: The general purpose of presented research was evaluation of surface morphology of chosen tram wheels: LUCCHINI (of Siemens Combino tram), PST (of Moderus Beta tram), and GT no 1 (of Duewag tram) operating in Poz...
The analysis of strength and fracture morphology of Al-Si compound made from moulding sand formulation with bentonite binding material and Portland cement
Purpose: This research aimed to analyse the casting result of Al-Si compound used formulation of moulding sand with bentonite binding material and Portland cement. Design/methodology/approach: Bentonite bind...