Investigation of Shock-Boundary Layer Interaction in a Ramp Flow with MVG Under Different Turbulent Inflows
Journal Title: Global Journal of Engineering Sciences - Year 2018, Vol 1, Issue 2
Abstract
MVG (micro vortex generator) is a potentially new device which can alleviate or overcome the adverse effects of SBLI (Shockboundary layer interaction) and improve the “health” of the boundary layer. In this paper, the SBLI in a ramp flow with MVG under different inflow conditions is investigated by LES (large eddy simulation). Three turbulent inflows with different boundary layer thickness are generated based on turbulent profiles obtained from DNS (Direct numerical simulation) of transition. The numerical results show that the interaction between ring-like vortices generated by MVG and the ramp shock is influenced by these different inflow conditions. With lower boundary layer thickness, the ring-like vortices are less distorted and thus more stronger when they travel to the ramp corner. The more regular and stronger ring-like vortices have more capability to eliminate or distort the strong ramp shock wave. Moreover, it confirms that ring-like vortices generated by MVG, and not the lower turbulent boundary layer, is dominant in flow separation reduction.
Authors and Affiliations
Caixia Chen
Keywords
Related Articles
- EP ID EP590733
- DOI 10.33552/GJES.2018.01.000506
- Views 96
- Downloads 0
Interactive Big Data Analytics Platform for Healthcare and Clinical Services
A Big Data Platform (BDA) with Hadoop/MapReduce technologies distributed over HBase (key-value NoSQL database storage) and generate hospitalization metadata was established for testing functionality and performance. Perf...
Study on the Impregnation of Archaeological Wood with an Automated Equipment
Heated impregnation is a routine dealing operation for unearthed archaeological wooden artifacts. Most of the water can be replaced and the voids can be filled with stabilizing chemical agents by putting the artifacts in...
Comparative Study of Inorganic TiO2 Nanoparticles and Organic Sawdust Dispersed Epoxy Based Composites
This work reports the synthesis and characterization of inorganic Titania (TiO2) nanoparticles and formation of epoxy-based composites loaded with 1wt%, 3wt%, 5wt% and 10wt% TiO2 nanoparticles and sawdust by weight. The...
Finite Element Analysis and Calculation of Normal Section Bearing Capacity of Steel Tube Bundle Composite Shear Wall
To be a new type of building component, composite shear wall with steel tubes bundle has been widely used in the steel structure housing system as the development of prefabricated construction. In this paper, ABAQUS has...
Effect of Boundary Conditions on Buckling Load for Laminated Composite Plates
It is observed that, for all cases the buckling load increases with the mode number but at different rates depending on whether the plate is simply supported, clamped or clamped – simply supported. The buckling load is a...