Investigation of the change of rock waste ammount at the diamond-disk cutting of blocks
Journal Title: Вісник Житомирського державного технологічного університету. Серія: Технічні науки - Year 2018, Vol 81, Issue 1
Abstract
The extraction and processing of natural stone is accompanied by the formation of a significant amount of waste. When processing natural stone, the largest amount of waste is formed precisely during the operation of cutting the raw material block on the slabs. It is therefore important to study the patterns of waste generation at this stage to make recommendations for their reduction. Single-disk diamond cutting is the most commonly used cutting method for small and medium stone processing enterprises of Ukraine. Therefore, the article studies the order of the waste production precisely with one-disk diamond cutting, and the changes in the amount of waste in absolute and relative terms depending on the size of the raw stone blocks and the cutting tool. The dependence of the amount of waste on the diameter of the cutter, the losses on the slabs from the linear dimensions of the block is established.
Authors and Affiliations
S. S. Iskov, R. V. Sobolevskyi
Keywords
Related Articles
- EP ID EP311568
- DOI -
- Views 105
- Downloads 0
Engineering consulting technology in production engineering intelligent mobile machines
The article investigates the features of layout tools with parallel structure. A dynamic simulation model is developed; it allows the simulation of a given law of motion platform parallel mechanism and receive such value...
The method of «blind» carrier frequency estimation of radio signals with linear digital modulation
Carrier frequency estimation in the conditions of a priori uncertainty of signal modulation and parameters is prerequisite for realization of frequency synchronization circuits in software-defined radio. To implement thi...
Analysis of roof bolting parameters to support inclined mine workings
Objective of the paper is to analyze a state of border rock mass of inclined mine working with roof bolting and to determine rational roof bolting parameters in the deepening process in the context of k7 seam of Novodone...
Computer simulation of temperature fields in a six-punch high-pressure apparatus with a change in the composition of the composite heater
Today, six-punch high-pressure apparatus of cubic type are perspective for growing single crystals of diamond by the temperature gradient method. Experimental determination of the temperature distribution in the growth v...
Usage of aids monitoring in automatic braking systems of modern cars
Increased safety can be carried out at the expense the installation on vehicles of automatic braking systems, that monitor the traffic situation and the actions of the driver. In this paper considered the advantages and...