Investigation of transportation bulk cargo sloping screw conveyor
Journal Title: Вісник Тернопільського національного технічного університету - Year 2015, Vol 79, Issue 3
Abstract
Screw conveyers, which are characterized by the simple design, high reliability, easy handling and adaptation in the automated systems being ecologically-friendly, have been widely used for the technological operations of the bulk-cargo transporting and mixing. To decrease the power consumption and to raise the quality of bulk-cargo mixing some original constructions of screw mixers with the screw operating member have been developed. Application of such screws requires to solve problems dealing with the determination of loadings on the screw operating member and the characteristic of the bulk-cargo movement, as well reasonability of their application. The operating regime of the inclined screw conveyer, which consists of screw operating member with constant parameters, has been analyzed. From the condition of the bulk-cargo particle contact with the screw surface and the case cylinder surface its location is determined by the radial parameter and the angle parameter. Boundary deviations of the particles speeds while transporting have been found and analytical dependences have been deduced. Analytical dependencies for finding angular speed and central speed of the particles movement along the inclined surfaces have been deduced. The proposed method for finding average circular velocity of the particle ω according to the boundary values ω1 and ω2 is characterized by the mathematic clearness and simplicity of realization. Integration dependence has been deduced.
Authors and Affiliations
Oleh Lyashyk, Olena Rohatynska, Taras Peleshok, Roman Lubachivsky
Keywords
Related Articles
- EP ID EP571199
- DOI -
- Views 58
- Downloads 0
Robust stability and evaluation of the quality functional of linear discrete systems with matrix uncertainty
New methods for analysis of robust stability and optimization of discrete output feedback control systems are developed. Sufficient stability conditions of the zero state are formulated with the joint quadratic Lyapunov...
Transmission of torque from the system of a hard stamps to the contour of a circular hole in an infinite plate
Contact interaction of hard stamps with angular points and massive elastic bodies with circular cylindrical holes is investigated in this article. Refined interaction model considers the initial difference of curvature o...
Load transfer from the infinite stringer to the two jammed along one edge identical stripes with initial (residual) stresses
The article is devoted to problems of contact interaction of infinite elastic stringer and two identical jammed along one edge pre-stressed stripes. The research has been conducted in the framework of linearized theory o...
Propagation of Lamb waves in a pre-stained compressible elastic layer interaction with a layer of an ideal compressible fluid
The problem of acoustic waves propagation in a pre-strained compressible elastic layer that interacts with a layer of ideal compressible fluid is considered. The study is carried out on the basis of the three-dimensional...
About short – and long – term strength of building constructions elements restored using injection technologies
The paper is devoted to the important scientific, technical and practical problems of predicting both service life time and strength of damaged structure elements over long-term operation, bearing capacity of which was r...