Investigations of Properties of Wax Mixtures Used in the Investment Casting Technology – New Investigation Methods
Journal Title: Archiwum Odlewnictwa - Year 2012, Vol 12, Issue 3
Abstract
The results of testing of the selected group of wax mixtures used in the investment casting technology, are presented in the paper. The measurements of the kinetics of the mixtures shrinkage and changes of viscous-plastic properties as a temperature function were performed. The temperature influence on bending strength of wax mixtures was determined.
Authors and Affiliations
J. Zych, T. Snopkiewicz
Keywords
Related Articles
- EP ID EP72800
- DOI 10.2478/v10266-012-0096-8
- Views 93
- Downloads 0
Model of knowledge representation about materials in the form of a relational database for CAPCAST system
This study is related with one of the components of a hybrid decision support system called CAPCAST, implemented under a research project conducted by WIMIIP AGH. It is a model of knowledge representation about materials...
Reclaimability of the spent sand mixture – sand with bentonite – sand with furfuryl resin
Introduction of new binding materials and new technologies of their hardening in casting moulds and cores production requires the application of reclamation methods adequate to their properties as well as special devices...
Bainitic-martensitic nodular cast iron with carbides
In this paper the possibility obtaining of upper bainite, lower bainite and martensite or their mixture in nodular cast iron with carbides has been presented. Conditions have been given, when in nodular cast iron with ca...
The influence of modification and squeeze casting on properties of AlSi11 alloy castings
The results of structural examinations and tests of mechanical properties of AlSi11 alloy, either gravity or squeeze cast, have been presented. The investigations have been carried out for both the non-modified silumin a...
Numerical simulation of the pressure filling of an angle plate cavity
In this paper, a three-dimensional mathematical and numerical model of the growth of the solid metal phase within a thin-walled casting, which take into account the pressure filling process of the mould cavity with molte...