IRESEARCH ON THE CORROSION OF CONSTRUCTION MATERIALS FISSURE MACHINERY HYDROCARBONS IN CONTAMINATED ENVIRONMENTS WITH STAFF FROM CORROSIVE BY CRUDE OIL DISTILATION
Journal Title: TEHNOMUS - Year 2011, Vol 18, Issue 1
Abstract
In the atmospheric distillation of crude oil facilities and in vacuum of the fuel oil were highlighted in uniform and uneven general corrosion, local corrosion in the form of points, spots, caves and cracking, selective, crevice, etc. .. All these forms of corrosion are dangerons, corrosion cracking, however, occupies a special place, because in a short time can switches off the machine or plant with hard consequences sometimes to assess. If sulfur crude oil processing appeared to corrosion cracking of austenitic stainless steel scales of DA-C1 column at the top, after 1.5 years of operation. Also, heat exchangers at the top of the columns DA and DV, with monel or carbon steel pipe. Hydrocarbon environments in the presence of additional factors, are potentially active for the emergence and development of corrosion cracking. The paper presents some aspects of metal corrosion crack to metal equipments in the crude oil distillation plants and fuel oil vacuum
Authors and Affiliations
Marius Morosanu, Ovidiu Georgescu
Keywords
Related Articles
- EP ID EP160617
- DOI -
- Views 71
- Downloads 0
SOURCES OF POLLUTION IN SIDERURGY AND TECHNIQUES FOR REDUCING NOXIOUS EMISSIONS
The systematic identification of the various sources of pollution creates the necessary background for organizing actions in order to prevent and fight against pollution. The diversity of the sources and forms of polluti...
RESEARCHES ON THE INFLUENCE OF ELECTRICAL PARAMETERS OF CIRCUIT ON DEPTH OF DRAWING OF CIRCULAR PARTS THROUGH ELECTRO-HYDRAULIC PROCESS
This paper deals with the influence of the discharge electrical parameters such as wire length and diameter priming discharge, discharge capacity and battery voltage on the stamped depth to electrohydraulic method
EFFECT OF EXHAUST VALVE TIMING AND BOOST PRESSURE ON ENGINE BRAKE PERFORMANCE
In recent years, due to the research in the field of road vehicles, there have been developed more powerful engines, in particular by reducing the energy loss in the friction forces, respectively the forces of air resist...
CONSIDERATION OF REFLECTION COEFFICIENT AS A FUNCTION OF FREQUENCY FOR WEDGES OF DIFFERENT MATERIALS
The wedges made of foamed poly-urethane-ether could withstand large de- formations without any damage. They would show a considerable extension before breaking, but a very low stiffness made additional support of the wed...
RESEARCH STUDY OF HARDNESS VALUES OBTAINED WITH DYNAMIC HARDNESS TESTER PROTOTYPE DD01
The paper submitted for publication is a comparative study of the hardness values recorded on metallic and non-metallic samples, values that been taken over with a standardized hardness tester Shimadzu HMV-2T, respective...