Isolated Switched Boost Push Pull DC-DC Step-Up Converter
Journal Title: GRD Journal for Engineering - Year 2018, Vol 3, Issue 0
Abstract
An isolated switched high step up boost DC-DC converter is discussed in this paper. The main objective of this paper is to step up low voltage to very high voltage. This paper mainly initiates at boosting a 30V DC into 240V DC. The discussed converter benefits from the continuous input current. Usually, step-up DC-DC converters are suitable for input whose voltage level is very low. The circuital design comprises of four main stages. Firstly, an impedance network which is used to boost the low input voltage. Secondly a switching network which is used to boost the input voltage then an isolation transformer which is used to provide higher boosting ability and finally a voltage multiplier rectifier which is used to rectify the secondary voltage of the transformer. No switching dead- time is required, which increases the reliability of the converter. Comparing with the existing step-up topologies indicates that this new design is hybrid, portable, higher power density and the size of the whole system is also reduced. The principles as well as operations were analysed and experimentally worked out, which provides a higher efficiency.
Authors and Affiliations
Rajitha Rajan, Sarath Prasad, Amrutha O, Reshma Nair
Keywords
Related Articles
- EP ID EP294507
- DOI -
- Views 69
- Downloads 0
Multistage Sand Separator and Filter
Sand is need to construction, manufacturing and industry Sand need to be filtered and separated from unneeded particles, stones, different sizes and other large particles before it is put to use. Our system puts forward...
Economic Analysis Of Canal Lining
Canals are the major conveyance system of any irrigation project, which delivers the irrigation water to fields. Most of these canals are earthen so considerable water losses take place due to seepage. These losses can b...
Automated Raspberry Pi Based Rural Bus with IoT Interfacing
The paper discusses about the techniques involved in controlling n bus interface with IOT. Due to the interfacing of IOT, all the control parameters get involved such as fuel level, location, amount of passengers, ticket...
Multifunctional Device for Blind People
Blindness is a state of lacking the visual perception due to physiological or neurological factors. In the existing system only specific functions are available whereas in this proposed system more than three functions a...
Hybrid Electric Vehicle Design
A hybrid electric vehicle (HEV) is a hybrid vehicle which combines a conventional propulsion system with a rechargeable energy storage system (RESS) to achieve better fuel economy than a conventional vehicle. Modern mass...