Kinect-Based Human Gait Recognition Using Locally Linear Embedded and Support Vector Machine
Journal Title: Jurnal Kejuruteraan - Year 2018, Vol 30, Issue 2
Abstract
Recognition of human gait could be performed effectively provided that significant gait features are well extracted along with effective recognition process. Thus, the gait features should be selected or optimized appropriately for optimal accuracy during recognition. Therefore, in this research, optimization of gait features for both oblique and frontal view are evaluated for recognition purpose using Locally Linear Embedded (LLE) along with multi-class Support Vector Machine (SVM). Firstly, dynamic gait features for one gait cycle are extracted from each subject’s walking gait that is acquired using Kinect sensor. Next, the extracted gait features were then optimized using LLE known as DG-LLE and further classified by multi-class SVM with Error Correcting Output Code (ECOC) algorithm. Further, to validate the effectiveness of LLE as optimization technique, the proposed method is then compared with another two gait features namely the original gait features known as DG and optimization using Principal Component Analysis labeled as DG-PCA. Results showed that the optimization based on DG-LLE outperformed the other two methods namely DG and DG-PCA for both oblique and frontal views. In addition, DG-LLE method contributed as the highest recognition rate for both frontal and oblique views. Results also confirmed that the accuracy rate for frontal view is higher specifically 98.33% as compared to oblique view with 94.67%.
Authors and Affiliations
Rohilah Sahak, Nooritawati Md Tahir, Ahmad Ihsan Mohd Yassin, Fadhlan Hafizhelmi Kamaruzaman
Keywords
Related Articles
- EP ID EP455569
- DOI 10.17576/jkukm-2018-30(2)-14
- Views 90
- Downloads 0
Two Component Injection Moulding of Bi-material of Stai
The two component injection molding (2C-PIM) is a promising technique for production of small, complex and high density, metal-ceramic parts in large scales. This method is a viable option for integrating incompatible fu...
Factors that Affect Cycling Transportation Mode for Postgraduate Students at Universiti Kebangsaan Malaysia by Logit Method
The main aim of this study is to investigate the factors that affect cycling transportation mode and give suggestions to encourage students to use these facilities to decrease the use of motorized transportation. Firstly...
Evaluation of Physical Properties of Clays Mixed with Silica Sand
This study examined the effects of heat treatment on two types of clays mixed with silica sand under laboratory conditions. Soils were subjected to three varied temperatures, i.e. 100, 250 and 500°C. The soil properties...
Kesan Ketidakseragaman Sedimen Dasar ke Atas Kerokan Tempatan di Sekitar Tiang Bersilinder (The Effect of Non-Homogeneous Sediment Bed on Local Scour Around Cylindrical Pier)
Studies of local scour around bridge commonly employed homogenous non-cohesive sediment as their simplified sediment parameters. However, sediment in real water stream is non-homogeneous with varying grain size distribut...
Developing and Validating a Simulation Model for Counting and Classification of Vehicles
An algorithm system approach has been presented for extracting traffic data using video image processing. While an offline program focuses on extracting vehicles, tracking them and provides the vehicle count for a short...