Kinetics and Thermodynamic Transformation of a Special S.G. Cast Iron
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2010, Vol 33, Issue 2
Abstract
The paper contains a study about the kinetics and thermodynamics transformation of a S.G. Cast Iron during the isothermal heat treatment. With the help of Johnson-Mehl and Arrhenius equations, there were described the activation energy “Q”, rate coefficients dependent on temperature “k”, exponent of reaction “n” and a constant dependent on frequency “A”.
Authors and Affiliations
Ioan MILOSAN
Keywords
Related Articles
- EP ID EP634380
- DOI -
- Views 71
- Downloads 0
Influence of Alloying Elements on Corrosion Resistance of Some Iron - Based Sintered P/M Alloys
In this paper is described the influence of alloying elements on corrosion behavior of sintered iron parts. The compacts were sintered at 1,150 °C and the sintering time was 60 minutes. After microstructural studies, the...
Hydrodynamic Aspects on EAF’s Smelt Metallic Mirror
Using the Physical and Mathematical knowledge, a new approach to EAF bath’s hydrodynamic aspects is proposed to be developed in this paper. Experimental results and a mathematical equation package have been concluded tha...
Generation, Morphology and Mineralogy of the Dust Particles from Off-Gas Blast Furnace
In order to elucidate the morphology and mineralogy of the dust from blast furnace, the fundamental aspects of its generation process were studied. A dust generated by the dry dedusting step of the cleaning process for t...
Radial Forging Machine. Technology for Axle Type Parts
his paper presents three types of radial forging machines to produce the axle type pieces. The new types of radial forging machines are presented cinematically. The movement of the deformation tools at these types of mac...
Use of Ecological Paradigm in Material Degradation Engineering
The necessity to move from the conventional technical-technological paradigms to the ecological paradigm is perfectly justified. The degradation of materials is defined as a negative phenomenon, whose study should be ext...