Lighting setting features of opto-electronic measuring system for controlling adhesive joints optical components
Journal Title: Journal of Achievements in Materials and Manufacturing Engineering - Year 2017, Vol 2, Issue 84
Abstract
Purpose: The purpose of this article is to study the features of setting and selecting the source of illumination of the optoelectronic measuring system for the control of adhesive joints of optical parts. Design/methodology/approach: The research and analysis of the lighting characteristics of halogen and LED lamps, used as a source of illumination in the measuring system, was carried out. Findings: In the course of experimental studies, the sensitivity and resolution of fixing defects of adhesive joints of optical parts were increased and the measurement error was reduced from 10 ± 1.2 microns to 10 ± 0.3 microns. Research limitations/implications: The limitations of the accuracy of the measurement are 10 ± 0.3 microns of adhesive defects, since the studies were conducted on separate samples of glues that did not cover all adhesives for the connection of optical surfaces and the thickness of glass surfaces was 1 mm and 2 mm. Practical implications: With the application of the lighting system approach described in the article, it is possible to improve any optoelectronic measuring system, thereby increasing the accuracy of the measurement. Originality/value: The originality of the results of the article is the experimental data of the studies of light-technical characteristics of the halogen lamp, which is used in the optoelectronic measuring system.
Authors and Affiliations
O. M. Markina
Keywords
Related Articles
- EP ID EP249468
- DOI 10.5604/01.3001.0010.7781
- Views 121
- Downloads 0
Field tests of components regenerated using the MULTIPLEX technology
Purpose: The purpose was to show the results of the field tests of components carried outusing the MULTIPLEX technology.Design/methodology/approach: The field tests have been carried out on the followingcomponents: brake...
Electromagnetic analysis of magnetorheological brakes
Purpose: In this proposed work, make a electromagnetic analysis of magnetorheologicalbrake for creating the automobile structure under the drive by wire concept.Design/methodology/approach: The proposed brake system cons...
The effect of chemical composition on microstructure and properties of TRIP steels
Purpose: Various alloying strategies can be used to produce advanced high strengthsteels and this work offers comparison of results achieved for four different lowalloyed steels with 0.2-0.4 %C, 0.5-2 %Si, 0.6-1.5 %Mn, 0...
Analysis of improvements in technological properties of WC-Co tool materials fabricated by spark plasma sintering
Purpose: The technological properties of WC-Co tool materials fabricated by spark plasma sintering has been investigated.Design/methodology/approach: The technological properties has been investigated using instrum...
Nano-structured (Mo,Ti)C-C-Ni magnetic powder
Purpose: The paper presents the results of phase composition and magnetic properties of Mo-Ni-Ti-C nanostructured powders. The aim of this research is understanding the correlation between key magnetic properties and the...