Load Behavior of an Vertical Axle Wind Turbine Model With a Four Blades Periodically Coupled Aerodynamically
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2018, Vol 41, Issue 3
Abstract
The paper is based on experiments conducted on the wind tunnel at low wind speeds (<4.5 m/s), on an experimental wind turbine model of the Savonius type with four blades and a D/H ratio of 2.6. The four blades are periodically coupled aerodynamically. The model acted a DC generator with a speed multiplier. Experiments were performed by modifying the generator electrical charge. The results confirm the validity of the concept proposed.
Authors and Affiliations
Nelu CAZACU
Morphological Aspects of Thermosetting Polymers/Zn Composite Coatings
The present work has the purpose of studying the morphological aspects of composite coatings having zinc matrix and thermosetting polymers (PF resin type NOVOLAC - RESITAL 6358/1 and epoxy resin type DINOX 110L) as dispe...
Influence on Reduction Scheme Hardness Cold Rolled Strip Mark Steel ST 12
The paper presents the results of the research on the influence of the evolution hardness scheme rolled steel, for the cold-rolled strip steel St 12. St 12 is intended for the manufacture of cold rolled strip stamping pr...
Two-way Shape Memory Effect in a Cu-13wt. %Al-4 wt.%Ni Shape Memory Alloy by the Thermo - Mechanical Cycling Method
A Cu - 13 % wt Al 4% wt Ni polycrystalline shape memory alloy has studied with a thermo mechanical cycling method. The two – way shape memory effect (TWSME) was obtained bending the alloy around a cylinder mold and by us...
On the Corrosion Resistance of Cu – Mo Composite Materials obtained by PVD Method
The Cu – Mo composite materials have been obtained by electron flow vaporizing followed by vapor –phase condensing. Researches have shown that corrosion resistance in wet environment varies with the content of molybdenum...
Occupational Risk Management in Industry
Occupational risk management is part of the occupational health and safety at workplace. Occupational risk management has a specific component relating to the assessment of the risk and a common component of all types of...