MACHINE LEARNING IN SMED
Journal Title: Journal of Machine Engineering - Year 2018, Vol 18, Issue 2
Abstract
The paper discusses Single Minute Exchange of Die (SMED) and machine learning methods, such as neural networks and a decision tree. SMED is one of lean production methods for reducing waste in the manufacturing process, which helps to reorganize a conversion of the manufacturing process from current to the next product. SMED needs set-up activity analyses, which include activity classification, working time measurement and work improvement. The analyses presented in the article are focused on selecting the time measurement method useful from the SMED perspective. Time measurement methods and their comparison are presented in the paper. Machine learning methods are used to suggest the method of time measurement which should be applied in a particular case of workstation reorganization. A training set is developed and an example of classification is presented. Time and motion study is one of important methods of estimating machine changeover time. In the field of time study, researchers present the obtained results by using (linear) multi-linear regression models (MLR), and (non-linear) multi-layer perceptrons (MLP). The presented approach is particularly important for the enterprises which offer make-to-order products. Development of the SMED method can influence manufacturing cost reduction of customized products. In variety oriented manufacturing, SMED supports flexibility and adaptability of the manufacturing system.<br/><br/>
Authors and Affiliations
Izabela KUTSCHENREITER-PRASZKIEWICZ
Keywords
Related Articles
- EP ID EP346529
- DOI 10.5604/01.3001.0012.0923
- Views 46
- Downloads 0
EXPERIMENTAL INVESTIGATIONS OF THE BONDING ZONE IN THE EXPLOSIVE WELDING OF A DIFFERENTLY STRUCTURED STEEL-ZIRCONIUM PLATERS
In this work the results of trials aimed at selecting optimal settings of the explosion welding process of 10 mm thick zirconium (Zr 700 grade) plates with carbon steel (P265GH grade) are presented. A bimetal Zr-steel an...
UTILISATION OF IOT AND SENSING FOR MACHINE TOOLS
Strong requirements for automation in the production processes using machine tools have been increasing due to lack of high-skilled machining engineers. Automation used to be utilised in mass production, but it is also n...
COMPLEMENTING AND ENHANCING DEFINITIONS OF LINE PROFILE COMPOSITE TOLERANCE IMPOSED BY ISO GEOMETRICAL PRODUCT SPECIFICATION
According to the ISO Geometrical Product Specifications (GPS), if two or more specifications of the same characteristic are to be indicated, they may be combined as a composite tolerance. Therefore there are no definitio...
SIMULATION FOR INSTABLE FLOATING OF HYDRODYNAMIC GUIDES DURING ACCELERATION AND AT CONSTANT VELOCITY
High speeds and the resulting hydrodynamic pressure lead to significant floating of the linear guides. During this movement, the floating behaviour shows phenomena that can be explained by the Reynolds equation. This pap...
THE ANALYSIS OF ENVIRONMENTAL AND HUMAN IMPACTS OF USING STRONG ALKALINE WATER FOR COOLING DURING MACHINING
An eco-friendly manufacturing approach is important for the environment. Enhancing machining performances is not only required to improve product’s quality, time saving, and reduces costs; it is also contributed to the...