MATHEMATIC MODEL FOR OPTIMIZATION OF ZINC-NICKEL ALLOY CO-DEPOSITION PROCESS
Journal Title: TEHNOMUS - Year 2011, Vol 18, Issue 1
Abstract
Any optimization method implies a mathematical model which should resolve the quantitative requires of the problems. This model is based on the substrate effect and has to calculate the partial current densities and so has to give prediction as far as concern the quantities of metal electrodeposited and the energy involved.
Authors and Affiliations
Violeta VASILACHE, Marius BENTA
Keywords
Related Articles
- EP ID EP160626
- DOI -
- Views 122
- Downloads 0
RESEARCH ON HOLLOW CATHODE EFFECT AND EDGE EFFECT AVOIDANCE IN PLASMA NITRIDING TREATMENT
This paper contains a description of the nitriding installation with unpolarized grid in order to avoid hollow cathode effect and edge effect. For the experimental study we have made wedge samples cut, and triangular pri...
IDENTIFICATION AND QUANTIFICATIONS OF CHEMICAL ELEMENTS AND MICROSCOPIC CHARACTERISATION OF THE COPPER BASE ALLOY AT DIFFERENT TEMPERATURE OF MOULDS
In this research paper, the structure identified by microscopic analysis for one copper base alloy at two different moulds are comparing between them because the solidified conditions was different. The samples were prep...
SOURCES OF POLLUTION IN SIDERURGY AND TECHNIQUES FOR REDUCING NOXIOUS EMISSIONS
The systematic identification of the various sources of pollution creates the necessary background for organizing actions in order to prevent and fight against pollution. The diversity of the sources and forms of polluti...
ERRORS OF MECHANICAL TREATMENT PROVOKED BY THERMAL DEFORMATIONS OF TECHNOLOGICAL SYSTEM
The thermal deformations of a detail and boring bar during the cutting out precise slots were investigated by the means of modeling of compassing the method of final elements. The main factors, which define the magnitude...
INFLUENCE OF THE MICROTOPOGRAPHY OF REAL SURFACES UPON DRY TECHNICAL CIRCULAR CONTACT IN ELASTO-PLASTIC DOMAIN
The paper presents a numerical approach with respect to the influence of the surfaces microtopography upon the dry technical circular contact in elasto-plastic domain, in the case of nolinear hardening. A = 6,35...