Mechanical and Wear Behaviour of Aluminium Metal Matrix Composites Reinforced with Dissipate Material-a Review
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 1
Abstract
Aluminium alloys are important materials, and these are used in different Engineering sectors like automotive, Aerospace, Marine and Electronics. The Mechanical and tribological properties of Aluminium alloys are improved by the addition of commercial reinforcements Al2O3, SiC, TiC,SiO2, BN, B4C, MgO,ZrB2. The Manufacturing cost of these alloys increases due to commercial reinforcement. The Establishment of Industries increases and these are leaving the dissipate material to the environment, which causes environmental pollution. Now a days, researchers are interested to re-use the dissipate material as a reinforcement to the aluminium alloy, to develop new materials with improved properties and less manufacturing cost. In this paper, Mechanical and wear behaviour of Aluminium Metal matrix composites reinforced with different dissipate material are studied.
Authors and Affiliations
B SUBBA RAO, K. VIJAYABHASKAR, Z. RAMESHBABU
Keywords
Related Articles
- EP ID EP281430
- DOI 10.24247/ijmperdfeb2018127
- Views 61
- Downloads 0
SOFTWARE STATIC ANALYSIS FOR THE DEVELOPMENT OF AUTOMOTIVE ELECTRONIC ENGINE-MOUNT SOFTWARE
In developing Automotive Software, the developer can be preventing in the logical defect of software by using a standard coding rules. The Coding guideline of MISRA-C is a coding rule that assures a high-reliability and...
CHARACTERIZATION OF ADDITIVE MANUFACTURED ABS AND NATURAL ABS SPECIMENS
Additive Manufacturing (AM) is a Rapid Prototyping technique. It is used for producing any real complex parts from the desired 3D CAD models. It can also manufacture prototypes. Additive Manufacturing can utilize raw mat...
Mathematical and Experimental Analysis of Solar Tunnel Dryer for Drying Beef as a Biological Product
This work analyses the performance of a solar tunnel dryer for drying beef, under forced convection by using a DC blower run by a photovoltaic panel (200w). An experimental setup of solar tunnel dryer has been designed a...
Design of Transmission System for a Hybrid Vehicle
Conventional vehicles use gasoline or diesel to power an internal combustion engine which produces harmful gases into the environment. The best way to overcome this problem is by using a hybrid vehicle. The goal of a hyb...
Optimization of Process Parameters on Thrust Force and Delamination Factor in Drilling of Carbon Fiber Reinforced Composites
The major objective of this work was to investigate a statistical model, based on Taguchi technique and to estimate the quality of drill in CFRP composite material prepared by hand layup technique. The design of experime...