Mechanical Properties of Glass Powder Concrete
Journal Title: 河南科技大学学报(自然科学版) - Year 2018, Vol 39, Issue 1
Abstract
The preparation process of glass powder (GP) was briefly introduced.The chemical composition, the particle size distribution of different grinding time, and the rate of heat release of hydration were analyzed.The glass powder were used as a cementitious material into the concrete.Through the design of different adding amount (0%, 10%, 20%, 30% and 50%) , different water-cement ratio (0.4, 0.5 and 0.6) , different grinding time (15 min, 35 min and 60 min) and other factors, the compressive strength of GP concrete was tested.The test results show that the glass powder contains a large amount of silica with potentially volcanic ash activity.The strength of concrete decreases with the increase of the mass fraction of glass powder, and the late volcanic ash activity of glass powder will partly offset the decrease trend of concrete strength.With the increase of grinding time, the particle size of glass particles decrease, the volcanic ash increase, and the dispersion is better, which can effectively improve the slurry structure, the density and the strength of concrete.
Authors and Affiliations
Guangyan LIU, Dazhi JIN, Changqiang DAI, Pengfei GAO
Competitor Recognition Based on Improved SVM Algorithm in E-commerce
To solve the low accuracy of identification of potential competitors in electronic commerce,an improved( support vector machine,SVM) algorithm was presented to optimize the recognition. By combining the Mercer theorem wi...
Design of Adjustable Ethernet Serial Server Based on ARM+FPGA
For the problems that the number of Ethernet serial device server's serial ports was fixed and was not be increased or decreased in real time, the Ethernet serial device server based on advanced risc machines ( ARM) and...
Simulation of Control Strategy of Hybrid Electric Bus
The low average speed of hybrid city buses leads to the overuse of power batteries, which cannot maintain good fuel economy in the whole driving conditions. A control strategy was proposed based on the vehicle speed and...
Design and Measurement of Near-Field-Focused Planar Arrays
In order to develop the focusing antenna used in the field of microwave hyperthermia, based on the principle of electromagnetic focusing, 4 × 4 near field focused planar microstrip array antenna with an operating frequen...
Improvement of Magnetically Coupled Resonant Wireless Power Transmission System
On the base of three coils magnetically coupled resonant wireless power transmission system,the coils structure of system was improved. According to the theory of mutual inductance coupling circuit,the mathematical expre...