METAL-CONTAINING POLYMERS IN GRAIN CHAIN CONVEYORS
Journal Title: Проблеми тертя та зношування - Year 2017, Vol 75, Issue
Abstract
Laboratory and production tests were conducted to increase the reliability and durability of grain chain conveyors. It is established that the index of abrasive abrasion of metal-containing polymers is determined by the degree of filling and reaches a minimum with a filler content of 15 weight percent. At the same time, the introduction of metallic fillers reduces the abrasion factor of 1.5 – 6 times. It is shown that the replacement of serial parts, made of polyamide-6, with metal-containing polymer increases the reliability and durability of friction units in grain chain conveyors.
Authors and Affiliations
A. I. BURYA, YE. A. YERIOMINA, S. P. YAKOVLEV
Keywords
Related Articles
- EP ID EP324492
- DOI -
- Views 49
- Downloads 0
FORCED COOLING OF THE FRICTION UNITS: «HEAT PUMP» EFFECT
A variety of types of brake devices used in the drives of hoisting and transport machines, road and construction machines, vehicles and in other branches of engineering. Friction pairs of brake devices significantly diff...
DYNAMIC ANALYSIS OF THE LEVER MECHANISM
The iterative method of the law of movement of an initial link of the lever mechanism in time of settled regime definition, not connected with dynamic synthesis, is offered.
DESIGN OF WORM GEARS WITH OPTIMAL GEOMETRIC PARAMETERS BASED ON MINIMIZATION OF LOSSES IN GEARING
The mathematical model of definition of losses in gearing worm gears and their de- crease on 10 … 15 % is stated at definition on the basis of planning mathematical experiment of rational parameters of transfers.
INFORMATION TECHNOLOGY IN THE METHODS OF SOLVING QUALITY CONTROL TASKS OF COATINGS
The necessity of using information technology for optimal control of technological process of spraying. Describes the characteristics of the coatings, influencing their quality. Developed generalized indicators of the qu...
THE REDUCING OF ENERGYLOADING OF FRICTION UNITS OF BAND-BLOCK BRAKES OF DRAW-WORKS
To increase the heat transfer coefficient from metallic and non-metallic elements of the friction of band-block brakes we can use a developed heat exchange surface. However, the natural cooling of the friction pairs of b...