INCREASING OF WEAR RESISTANCE OF CUTTING EDGES BY COMBINED TREATMENT METHOD
Journal Title: Проблеми тертя та зношування - Year 2017, Vol 75, Issue
Abstract
The wear resistance of the operating surfaces of the cutting parts that been restored by com-bined treatment method which includes preliminary chemical-thermal saturation in powder mixtures and electric contact deposition of the achieved material under rational regimes is investigated. The effect of the powder mixture composition for the saturation of the surfacing tape on the distribution of the structural components and on it’s penetration depth in deposit-ed layer is explored. The influence of the structural components distribution in the deposited layer on the magnitude and the duration of the deterioration of the restored surface by the combined treatment method is investigated. It is determined that significant rise of the wear resistance of restored by combined treatment method surfaces is due to presence of the solid solution in the structure of deposited layer and to it’s subsequent hardening while the electric contact surfacing.
Authors and Affiliations
V. А. KORSUN, О. V. BEREZSHNAYA, V. D. KUZNETSOV
Keywords
Related Articles
- EP ID EP324431
- DOI -
- Views 54
- Downloads 0
FILLING OF LOLA FIBER TO ABRASIVE CONNECTION ORGANOPLASTICS ON THE BASIS OF FENILON C-1
It was investigated the influence of organic fiber Lola on the abrasive wear resistance of the aromatic polyamide of phenylone С-1 in the article. The increase of wear resistance of the materials which work in aggressive...
FORECASTING OF THE MAXIMUM LINEAR WEAR OF CONTACT SURFACES IN EXTREME FRICTION CONDITIONS
The influence of the contact voltage on the tribotechnical properties of lithium lubrica-tions under unsteady friction conditions at the termination of the supply of lubricant to the contact zone is analyzed. The interre...
FORMATION OF TRIBOTECHNIKAL PROPERTIES OF PLASMA COATINGS ON STEEL 12C-Cr18-Ni10-Ti BY LASER TREATMENT
The questions of the strength of adhesion of plasma coatings with the base and their durabil-ity. These ways оf improving the quality of such coatings by melting coating and thin surface layer or base their repeated cycl...
DETERMINETION OF CONTACT AREA OF THE SPHERICAL INDENTER WITH SURFACE OF DETAILS IN BURNISHING
The problem of determining contact area of spherical indenter with the surface of a part dur-ing burnishing is solved in this article. It made possible to provide a high sensitivity for calculat-ing the stress-strain sta...
POWER LOSSES OF GEAR SYSTEMS
This paper provides a review of experimental investigations and available models of gear load-independent power losses (windage losses, churning losses and air-oil pocketing power losses) for spur, helical, and bevel gea...