Microstructure and Mechanical Properties of API 5L X70 Grade Steel Pipes Produced by Submerged Arc Welding Method
Journal Title: Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji - Year 2017, Vol 5, Issue 1
Abstract
In this study, API 5L X70 steel roll materials welded via submerged arc welding technique (SAW). Macrostructure, microstructure and mechanical properties of welded samples were investigated. Tensile, hardness, Charpy impact and bending tests were performed to determine of mechanical properties. Macrostructure analyses showed that full penetration was achieved on welded parts. Microstructure images showed that fine grain structures were formed in weld metal, large, complex and amorphous grain structures were dominated in the coarse grain region, whereas homogeneously distributed coaxial grain structures were dominated in the fine grained region in HAZ. In addition, it was observed from tensile test that yield and maximum tensile strength values of welded parts were higher than the main metals. According to the hardness tests, the highest hardness values were measured on the weld metal. Charpy impact tests showed that the highest fracture toughness values were measured on the main material, the lowest fracture toughness values were measured on the welded metal.
Authors and Affiliations
Sinan AKSÖZ, Hakan ADA, Alpay ÖZER
Keywords
Related Articles
- EP ID EP480698
- DOI -
- Views 98
- Downloads 0
Comparing Data Transmission Techniques Used in Industrial Areas
In this study, the data transmission techniques used in industrial systems have compared and issues for determining appropriate communication technique that is suitable for the user’s aim and system must be considered is...
Integrated Circuits Tester Design for Logic Circuit Laboratories
Logic circuit laboratory is one of the important laboratories for Electrical-Electronics Engineering department. The Integrated Circuits (ICs) must work correctly during the experiments. It is difficult and time-consumin...
Investigation of Wear Behavior of Aluminum Matrix Composite Reinforced by Al2O3 and Produced by Hot Pressing Process
In this study, Al powder produced by gas atomization technique has 72.06 μm average particle size and 99 % purity was mixed with as a reinforcement Al2O3 has 99.52% purity and 45 submicron particle size in a high energy...
Server Monitoring Application for Insider Attack Detection and Prevention
Although insider attacks have increased rapidly in recent years and cause enormous damages, there are very few academic studies that have investigated this problem and proposed a solution. Many of these attacks are kept...
The Lattice Boltzmann Method for Fluid Flows and Its Applications
A numerical method in Computational Fluid Dynamics (CFD), which is called “Lattice Boltzmann Method (LBM)”, is studied in this paper. The main difference between LBM and conventional CFD methods is how they investigate p...