Mode matching technique for computation of resonance frequencies of composite metal-dielectric resonator
Journal Title: Вісник НТУУ КПІ. Серія Радіотехніка, Радіоапаратобудування - Year 2013, Vol 0, Issue 55
Abstract
The composite metal-dielectric resonator (CMDR) design is presented. An eigenproblem solution of the CMDR by mode matching technique is discussed. The problem is reduced to a set of homogeneous integral Fredholm equations of the first kind. The system is solved using Galerkin method. The technique is more efficient than FEM in terms of computational resources due to low rank of the system. It is shown that changing the air gap width between the dielectric and the metal plate provides the resonant frequency tuning. It is also shown that in order to achieve efficient electromechanical tuning of the CMDR resonant frequency, the resonant modes with a dominant electrical field component perpendicular to the air gap between the dielectric and the metal plate have to be selected. The tuning efficiency grows with the DR radius to thickness ratio and increasing permittivity. The CMDR can be used for creating compact high-Q micromechanical-tuned radiofrequency devices with wide tuning range.
Authors and Affiliations
K. Savin, Yu. Prokopenko
Keywords
Related Articles
- EP ID EP309040
- DOI 10.20535/RADAP.2013.55.24-33
- Views 100
- Downloads 0
Efficiency of Microwave Oscillators Phase-Noise Reduction Advices.
The phase-noise reduction advices as the result of linear and nonlinear analysis and the efficiency of their oscillators design applications are consided.
Eigenvalue problem of open inhomogeneous dielectric waveguide
Introduction. Algorithm for solving eigenvalue problem of open inhomogeneous dielectric waveguide is presented. Open waveguide divided into two regions. Inner inhomogeneous region is discretized using node–edge finite el...
Comparative analysis of methods for testing software of radio-electronic equipment
The analysis of the concepts of quality and reliability of software products that are part of the radio-electronic equipment is making. Basis testing methods of software products that are used in the design of hardware a...
Microstrip filter based on 2D inhomogeneities
Realization of microstrip narrow-band filters based on 1D- and 2D-inhomogeneities areconsidered. Features impedance dependencies of filter structures are analyzed. There areillustrated, that 2D-inhomogeneities, as electr...
Evaluation of electromagnetic compatibility of highfrequency induction systems in a local facility
The article shows one approach to assess the electromagnetic environment in a local facility that is running induction system for transferring high frequency signals. A distinctive feature of these systems is to use a re...