Modification of Surface Properties by Laser Cladding with Ni–Cr–B–Fe–Al Alloy
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2012, Vol 35, Issue 3
Abstract
The paper is focused on modification of surfaces properties by laser cladding. To follow the corrosion behavior in different media of laser cladding layers made of nickel based alloy Ni - Cr - B - Fe - Al. It was studied using the potentiodynamic method. Elasto – plastic behavior of the assembly base material - deposited layer was monitored by using sliding indentation, in dry friction conditions. It was determined the bearing capacity of surfaces.
Authors and Affiliations
Simona BOICIUC, Constantin SPÂNU
Keywords
Related Articles
- EP ID EP611033
- DOI -
- Views 69
- Downloads 0
Tribological Properties of Composite Materials Obtained Using Electrodepositing
The resistance to abrasive wear of composite materials obtained using electrodepositing in nickel and copper matrix was studied. The samples containing composite layers of graphite in copper matrix, titan dioxide and zir...
New Materials to Support the Preservation of Old Wood Used for Art Objects
This paper presents new materials that replaced the main list of substances with a high toxicity level (banned in the European Community), and the interventions in the preservation of old wood used for art objects. Altho...
Experimental Research on Heating Behavior of Some Steels During Hot Metallurgical Processing
The heating of steel semi-products in view of hot rolling process or heat treatments is achieved at the large scale in propulsion ovens for the increase of their deformability and to improving mechanical characteristics...
Basic Mathematical Modeling of the Environmental Processes in the Lower Danube Region [I]
In most environmental pollution problems, the pollutant is released to the environment by the, almost always, turbulent flow of a carrier fluid. The pollutant mixes with the surrounding fluid (air or water) and undergoes...
Study on the Influence of the Chemical Composition in the Thermomechanical Processing of the Steel Products
This paper presents the results of industrial scale researches on the influence of the chemical composition on the characteristics of high yield point plates of wieldable fine grain steels. The comparative study of the m...