The Correlation Between Mechanical Characteristics and Technological Parameters in Heat Treatments Applied to Moulding Aluminium Like ATSi5Cu1
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2006, Vol 29, Issue 1
Abstract
The paper contains an experimental study of colligating the technological parameters of the artificial aging operation namely time and soaking temperature with hardness and mechanical strength properties gained after the treatment. The tests were made on a moulding aluminum alloy like ATSi5Cu1 by using moulded test bars in metallic shell. There were realized metallographic photographs and strength tests.
Authors and Affiliations
Carmen NEJNERU, Dan-Gelu GĂLUŞCĂ, Roxana-Gabriela CARABET, Dragoș ACHIŢEI, Nicanor CIMPOEŞU
Keywords
Related Articles
- EP ID EP663902
- DOI -
- Views 54
- Downloads 0
The Steam - Secondary Source of Energy in Metallurgy
The paper is focused on a study of how to use the steam from recovery boilers of LD converters to produce electricity in turbine generators and heat in a heat network.
Influence of Some Technological Parameters of Fluidized Bed Carbonitriding on the Surface Hardness of Carbonitrided Parts from Low Alloy Steels
The paper describes the experimental research of thermos-chemical treatment of carbonitriding performed on samples of different brands of low alloy steels. The technological parameters whose influence on the carbonitride...
Measurement and Analysis of Vibrations on a Cold Rolling Mill for Steel Strip
In this paper the authors made measurements and registration of vibration by using accelerometers posted on the top backup rolls. This is a new way for predict the damage in the rolling mill equipment and the precision o...
Hardening of the Grey Cast Iron through the Vibrating Electrode Method Using a WC Electrode and in Combination with TiC and Ti Electrode
There have been tested samples of grey cast iron, the hardening being made through WC coating through the vibrating electrode method with a layer, two layers and through double layers combined with Ti and TiC. Besides do...
Some Considerations on Environmental Sand Cores with Inorganic Binder
Traditionally, complex sand cores are produced using organic binders such as phenolic and furan resins. These binders can create bad smelling fumes requiring complex and expensive ventilation equipment to fulfill environ...