Researches Regarding the Influence of Steam Oxidation on Sintered Alloys Properties
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2013, Vol 36, Issue 3
Abstract
In this paper is studied the influence of steam treatment applied on sintered steels and the mechanical properties and abrasive wear behavior for two different types of powder. Steam treatment was carried out at temperature of 550° C and maintaining time of 60 minutes. It was found that the best values for Vickers microhardness and abrasive wear were recorded for sampler P2.
Authors and Affiliations
Mihaela MARIN, Florentina POTECAŞU, Octavian POTECAŞU
Keywords
Related Articles
- EP ID EP596083
- DOI -
- Views 53
- Downloads 0
Research on the Complex Microalloyed Zinc Melts
Microalloyed zinc melts are used in hot dip galvanized processes in order to improve products quality. Experiments aimed at obtaining zinc coatings with increased resistance to corrosion, which adhere very well to steel...
Siderurgy Slags Recovery in Building Industry
During the metallurgical processes of iron and steel elaboration, besides the basic products, it results a serious of secondary products (wastes) in high quantities but with a high recycle – recovery potential, and their...
Superior Valorisation of the Aluminium Scraps for Obtaining Complex Aluminium Master Alloys Used in Advanced Refining of Steels
The research about aluminium scraps valorisation to obtain master alloys with reactive elements (Al, Mn, Si) used for special steels refining is presented in this paper. By this way the recycling of aluminium scraps lead...
Mathematical Model of the Strip Rolling Made of the Sinterized Metallic Powders
The minimum-power method has been used to investigate the final ratio soft-layer thickness to tough-layer thickness in bimetals with porous layer rolling. The velocity fields has been determined and the total deformation...
Research on Chemical Deposition of Silver with Antibacterial Role in Implantology
The paper presents a synthesis of the laboratory research on the conditions of achieving chemical deposition of silver on oral implants made of Ti base alloy (bioalloy Ti10Zr). There were used several chemical deposition...