Structure-Property Correlation of Composite Materials Based on Cu-Mo Obtained by PVD Method
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2013, Vol 36, Issue 1
Abstract
The paper describes reviews referring to determination of working parameters of the development processes of composites in copper matrix, by vapour-phase deposition method. The molybdenum was used as complementary phase. Structural characterization of coatings developed by optical microscopy and electronic scanning and effects of surface structure on their characteristics were presented. The specificity of the technology for obtaining Cu-Mo composites is a condition to formation a special laminated structure. The mechanical characteristics of the condensate depending on the amount of molibden. An important role in forming the structure and characteristics is played by the defects which were formed in the condensate during the transfer in the liquid phase as drops. Electrochemical tests have shown that the corrosion resistance of the composites obtained by PVD method is higher than pure copper.
Authors and Affiliations
Lucica ORAC, Vera GRECHANYUC, Olga MITOȘERIU, Stela CONSTANTINESCU
Keywords
Related Articles
- EP ID EP596183
- DOI -
- Views 68
- Downloads 0
Influence of Normal Loads on Corrosion Behaviour of Ti-6Al-4V Alloy during Fretting in Artificial Saliva
The fretting corrosion behaviour of untreated Ti-6Al-4V alloy in artificial saliva solution was evaluated based on the change in open circuit potential (OCP) measured as a function of time. Fretting corrosion experiments...
Thermomechanical Process Simulation to Predict Processing of Mechanical Properties of Alloys Al-Zn-Mg-Cu
This paper presents how to perform simulation (prediction) mechanical properties of aluminum alloys of the system Al-Zn-Mg-Cu. Graphical interface that can predict the mechanical properties studied was performed using MA...
Behavior of Ni/Al2O3 Nanocomposite Thin Layers in Corroding Environment
This paper investigates the effects of adding alumina nanoparticles in the electrolyte bath on surface topomorphologies and structure of electrodeposited nickel. The influence on the corrosion process in NaCl solutions h...
Influence of the Unconventional Treatment Applied to a Steel on the Corrosion Evolution
The study of an alloyed steel with Cr Mo with an important content of aluminum (0.9…1.2%), unconventionally treated in magnetic field, is attractive because of the durability which increases along with the improvement of...
The Laboratory Experiments Regarding the Intercritical Heat Treatments Applied on the Low - Alloyed Steel
The paper presents the research results regarding the influence of the intercritical thermal treatments carried out on some hypoeutectoid steel castings. The purpose of this research at the laboratory scale is to measure...