Modification of Surfaces of Special Alloys by Nitrogen for Power Engineering
Journal Title: Український журнал із машинобудування і матеріалознавства - Year 2015, Vol 1, Issue 1
Abstract
The use of nitrogen as an alloying element presents a great interest for the improvement of properties of alloyed steels and special alloys. Superficial layers were formed by ionic implantation and by melting the surface by nitrogen plasma. After this kind of treatment, there form a continuous defect-free layers with a good adhesion to the surface. Surface treatment of steels and vanadium alloys increases their corrosion resistance and microhardness of surface layers. A combined supply of alloying elements into the melting area allows us to control the type and the density of secondary phases which are formed as the result of the reaction diffusion. In this way, depending on external needs, it is possible to increase either corrosive-electrochemical properties of the surface (when alloyed layers consist mainly of nitride or oxinitride phases) or wear resistance (when carbide or carbonitride phases will constitute a greater specific volume in the formed layers).
Authors and Affiliations
Zoya Duriagina, Tetiana Tepla
Keywords
Related Articles
- EP ID EP200692
- DOI -
- Views 91
- Downloads 0
Electromechanical Model of Machine for Vibroabrasive Treatment of Machine Parts
A lot of operations on trimming clean and finishing – stripping up treatment, first of all, removing of burrs, rounding and processing of borders, until recently time was carried out by hand, and hardly exposed to automa...
Experimental Improvement of the Technology of Cutting of High-pressure Hoses with Metal Braid on Hand Cutting Machine
In the article the review of the problem of improvement of technology of high pressure hoses cutting on the hand cutting machines is analyzed. Different methods of cutting of high pressure hoses into the billets are over...
Investigation of the Influence of Machining Factors on the Workpiece Deformation Mode in the Chip-forming Zone by the Finite Element Method
The results of studies of the impact strength, temperature factors and parameters of cutting tool geometry on the formation of the stress-strain and thermodynamic state of surfaces with different types of engineering mat...
Choose of optimal regimes of traffic light control in operating zone of pedestrian crossing
On the given stage of motorization level development and increase of traffic flow intensity, with increasing frequency apply to the implementation of intelligent automated systems of traffic control. The quality of their...
Cutter Force and Influence of Elastic Deformation of Technological System of Gear-Hobbing Machine on Precision of Radial-Circumferential Method of Gear Cutting
The relevance of the problem which is solved in this article has been substantiated. In modern machines and equipment, rotary motions which cannot be implemented without gear wheels and gear trains are always present. At...