Motorcycle Rider Fatigue Analyse: Results of an Online Survey
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 2
Abstract
The mMotorcycle is one of the easiest transports in India when riding in peak hours, consisted traffic situations and poor roads. Besides easiness motorcycle causes fatigue and pain on the human musculoskeletal system. The study has been taken out through an online questionnaire- based survey to all over India for a period of about one year. This study focusesis focus on four operating modes during riding (throttling, clutching braking and gear shifting). The body parts which are used to involve in operation are wrist, elbow, ankle, and foot. The fatigue due to riding can be divided in to two activities with the subjected to the body; one is the body posture while absorbing road shocks for long periods and second is applying the required forces to control the motorcycle. The Survey covered five hundred respondents, four hundred and twenty with male and eighty female. The analysis of survey data indicates that all riders are affected by pain on the different part of their body. The result shows a majority of the male and female riders affected by wrist and elbow pain than the ankle and foot. The survey points out the need for ergonomics and dynamic analysis on two- wheelers to provide good ride comfort.
THICKNESS EFFECT OF DCB SPECIMEN ON INTERLAMINAR FRACTURE TOUGHNESS IN CARBON/EPOXY COMPOSITES
In this work, the influence of specimen thickness on interlaminar fracture toughness in delamination of unidirectional carbon/epoxy laminates is presented. Specimens of three different thicknesses: 3.99, 5.27 and 6.65 mm...
Ranking of Lean Tools using Weighted Scoring Method
Lean Manufacturing is a manufacturing paradigm, when implemented, it gives an evolutionary change in the production environment. The selection of lean tools is the changing factor in implementing the lean strategy. Lean...
Effect of High Erbium on Mechanical Properties of Aluminium Alloy
The effects of the addition of the rare earth element, erbium (Er), on the microstructure and mechanical properties of LM 24 alloy were investigated. A microstructural characterisation was performed using an optical micr...
Comparing the Effect of Heat Treatment and Plasma-Nitriding on Corrosion Resistance of Ni-B-CNT Electroless Coating with Different CNT Concentration on Aisi 4340 Steel
The aims of the work to study the resistance of corrosion and the hardness of plasma-nitrating and heat treatment of coatings with electroless Ni-B-CNT. Various concentration of CNT range, (0, 0.35 and 0.7)g/L in Ni-B-CN...
Renewable Energy Based Micro-Grid System for Power Quality Improvement
In recent years the microgrid had produced more power and utilized in the various application. The linear and non-linear load is used in grid-connected PV based converter system. The novel control strategy used to offer...