mproving the Technology Synthesis and Properties of Biodiesel
Journal Title: Фізика і хімія твердого тіла - Year 2018, Vol 19, Issue 3
Abstract
Existing technologies for the synthesis of active additives to motor fuels are quite complicated. Therefore,improvement of the technology of biodiesel fuel synthesis in order to increase the cetane number and andimprovement of other diesel fuel characteristics with combustion activators is an urgent problem. Raw materialsfor the biodiesel production are vegetable oils methanol and ethanol with the alkaline or acid catalyst usage. Theuse of ethyl esters of long-chain fatty acids of rapeseed oil as biodiesel has a number of advantages comparedwith the methyl ester use [2]. Thus, biodiesel fuel was synthesized by transesterification of rapeseed oil withabsolute ethanol (99.9%), which was dehydrated with calcium oxide (95%) freshly prepared, using sodiumethoxide as a catalyst [3]. In order to achieve a high degree of mixing of a heterogeneous system, which consistsof natural oil and ethyl alcohol, a specially synthesized non-ionic emulsifier was used as a reagent. Thetechnological features of this type of a rapeseed oil transesterification process were studied and the maincharacteristics of the new diesel fuels such as fractional composition and molecular mass were estimated usingthe chromatographic method and mass spectrometry. The yield of biodiesel from rapeseed oil increases from 85 -90 % to 95 – 98 % without waste fraction of glycerol (10 – 15 %).
Authors and Affiliations
V. Ribun, S. Kurta, T. Gromovy, O. Khatsevich
Research Sorption of Barium and Strontium Inorganic Sorbents and Opportunity Elemental Surface Analysis Methods Sorbents Photonuclear
Sorption of Ва2+ and Sr2+ ions from aqueous solutions by titanium phosphate and pelleted zirconium silicate is studied. Efficiency of zirconium silicate for Ва2+ ion extraction is shown. The parameters of the porous stru...
Photoluminescent Properties of CdTe Nanocrystals in Colloidal Solutions and Polymer Films
Using stabilizers and promoters we have obtained colloidal CdTe nanocrystals (NCs) in aqueous solutions. Incorporation of the CdTe NCs into polymer films has been fulfilled subsequently. It is shown that the use of vinyl...
Models Semiinsulating Layers of Gallium Arsenide in Their Formation of Multiply Charged Ion Implantation
The technology multiply implantation of impurities, which allow lateral and vertical insulating layers. Experimental study on the creation of high-and thermostable insulating layers in ion-doped n +-n - i-semiinsulating...
Temperature Dependence of the Refractive Index of Vitreous Alloys of the Ag-As-S System
The temperature coefficient of refractive index dn/dT is determined for glassy allous of the system along the(Ag2S)x(As2S3)100-x, direction (0 < x <20) in the spectral interval of 1–5 μm at temperature of 77– 400 K thegl...
Peculiarities of Forming of Microwave Arsenide-Gallium Submicron Structures of Large-scale Integrated Circuit
The peculiarities of technological processes of formation of submicron Schottky field transistors usingarsenide-gallium technology, i.e. the technology of Schottky field transistors formation with a self-alifned gate ont...