MULTILAYER CONCRETE INDUSTRIAL FLOORING SOLUTIONS ANALYSIS
Journal Title: Architecture and Engineering - Year 2017, Vol 2, Issue 4
Abstract
The subject of the article is the presentation of European experience in the field of construction of industrial concrete floors. For the construction of the concrete slab floor to be prepared subsoil. Land stabilization can include mechanical stabilization, physical stabilization, and chemical stabilization. The most commonly used stabilization is mechanical stabilization. In order to determine the efficiency and effectiveness of the process, the treatment depends on the soil moisture for the soil type, so attention is paid to this material feature. Accordingly, the recipes from the French experience for the concrete stabilization layer are presented. For such prepared substrate the choice of material parameters and properties of concrete mixtures for concrete slabs for the concrete class in the strength of 10 to 35 MPa was presented.
Authors and Affiliations
Marlena Rajczyk, Paweł Rajczyk
Keywords
Related Articles
- EP ID EP354787
- DOI 10.23968/2500-0055-2017-2-4-48-55
- Views 99
- Downloads 0
VESSEL MIXERS WITH VIBRATION ACTIVATOR IN CONSTRUCTION ENGINEERING
Construction mixes are classified as polydisperse heterogeneous systems, where surface phenomena occurring at the phase interface, exert a great influence on formation of such systems. As for mixing processes, adsorption...
Substantiation of the Replacement Interval of Construction Machines by the Target Reliability Level
The article presents results of researches in the field of ensuring operational capability of complex technical objects using the example of construction machines. Methods of determining the replacement interval of eleme...
MODELING FRACTURE OF REINFORCED CONCRETE STRUCTURES UNDER IMPACT
Introduction: The papers presents results of an integrated experimental and numerical study on behavior of reinforced-concrete beams under impulse loading. The beams under study had three layers. The upper and lower laye...
CASE STUDIES OF THE DESIGN, CONSTRUCTION AND CERTIFICATION OF ENERGY-EFFICIENT HOUSES IN THE REPUBLIC OF KOREA
Passive houses with three principles of comfort, low energy and economic efficiency started from Germany in 2009. Passive houses must have a heating energy demand of less than 15 kWh/(m²a) per year, and there are current...
AN INTERACTIVE CONSTRUCTION PROJECT FOR METHOD OF STATEMENT BASED ON BIM TECHNOLOGIES FOR HIGH-SPEED MODULAR BUILDING
The concept and methodology for interactive design of Methods of Statement based on the use of technical and informational models, technological charts, and 3D models of construction facilities is suggested. The article...