Estimation of fretting fatigue life using a multiaxial stress-based critical distance methodology
Journal Title: Frattura ed Integrità Strutturale - Year 2015, Vol 9, Issue 33
Abstract
This work presents a methodology for life estimation of mechanical couplings subjected to fretting fatigue. In this approach, a stress-based multiaxial fatigue parameter is evaluated at a critical distance below the contact surface. The fatigue parameter is based on an improved formulation of the Modified Wöhler Curve Method, in which the shear stress amplitude is measured via the Maximum Rectangular Hull method. To apply the Theory of Critical Distances in the medium-cycle fatigue regime, the critical distance is assumed to depend on the number of cycles to failure. Available fretting fatigue data, conducted on a cylinder-plane contact configuration made of Al alloy 4% Cu, were used to assess the methodology. Most of the life estimates were within an error band given by a factor of 2.
Authors and Affiliations
F. Castro, J. Araújo, M. Pires, L. Susmel
Keywords
Related Articles
- EP ID EP153293
- DOI 10.3221/IGF-ESIS.33.49
- Views 64
- Downloads 0
A three-parameter model for fatigue crack growth data analysis
A three-parameters model for the interpolation of fatigue crack propagation data is proposed. It has been validated by a Literature data set obtained by testing 180 M(T) specimens under three different loading leve...
A magnetorheological clutch for efficient automotive auxiliary device actuation
In this paper the results of a project funded by Regione Toscana aimed at reducing the power absorption of auxiliary devices in vehicles are presented. In particular the design, testing and application of a magneto...
Modelling 3D crack propagation in ageing graphite bricks of Advanced Gas-cooled Reactor power plant
In this paper, crack propagation in Advanced Gas-cooled Reactor (AGR) graphite bricks with ageing properties is studied using the eXtended Finite Element Method (X-FEM). A parametric study for crack propagati...
Sulla stima di macro, micro e nano-durezza di materiali metallici mediante analisi elasto-plastiche agli elementi finiti
Il lavoro sintetizzato nel presente articolo si pone come obiettivo primario quello di investigare la possibilità di stimare, mediante un approccio elasto-plastico agli elementi finiti, la durezza dei materiali met...
Prediction of three-dimensional crack propagation paths taking high cycle fatigue into account
Engine components are usually subject to complex loading patterns such as mixed-mode Low Cycle Fatigue Loading due to maneuvering. In practice, this LCF Loading has to be superimposed by High Cyclic Fatigue L...