Estimation of the Heat Cumulated Inside a Wall with Cylindrical Symmetry
Journal Title: ANALELE UNIVERSITATII DIN CRAIOVA - Seria Inginerie electrica - Year 2015, Vol 39, Issue 39
Abstract
The issue of mathematical modeling in order to simulate physical processes or physical systems, permanently preoccupy a significant number of researchers. The sustained efforts being made in this direction are determined by the benefits that simulation can provide and by the development of software packages capable of performing such simulations. It is obvious that mathematical modeling followed by simulation allows the study of possible situations that would be difficult to achieve in real systems and could lead to an irremediable defect. If the mathematical modeling of stationary processes with respect to time is pretty well set, for the transient process simulation is still much to study. The mathematical equations describing such processes are generally of higher order, sometimes they are transcendent, and thus harder to solve. In the paper the authors are concerned with the modeling of transient thermal processes. When analyzing electrical heating systems, the main problem occurs due to heat transfer through the walls. This phenomenon appears at multilayered cylindrical walls, when heat is transferred through it, and a part of it is stored into the wall as internal energy. This paper aims to determine some mathematical relationships which describe the heat storage processes in components with cylindrical geometry. Determined mathematical equations will be used furthermore in the modeling of transient thermal processes in structures with cylindrical geometry. This allows the simulation of multilayer insulation systems under a transient thermal regime for a long time, using Matlab-Simulink toolkit.
Authors and Affiliations
Mitica Iustinian Neaca, Andreea Maria Neaca
Keywords
Related Articles
- EP ID EP112138
- DOI -
- Views 152
- Downloads 0
Disturbance Analysis for Power Systems Based on LabVIEW Real-Time and Reconfigurable FPGA Modules Using Wavelet Transform
This paper present a disturbance analysis monitoring system for the purpose of detection of disturbance analysis using Wavelet Transform (WT). The proposed system is based on the real-time capabilities of the Real-Time L...
Increasing Safety of the Tests Carried Out in Laboratories by Using Electronic Devices
The ability of the circuit breakers to interrupt the electrical current in circuits with capacitive load it is tested and verified in testing laboratories. During the test, the capacitive type of load impedance si...
Power Control and Energetic Performances of an Induction Heating System Destined for Drying of Current Transformers
This paper is concerned with the design of the power control system for a single-phase voltage source inverter feeding a parallel resonant induction heating load and the analyse of its energetic performances. The control...
Increasing Frequency Capability of PMSM Vector Controlled Drive for Pumped Storage
The subject of this paper is a comparative study between two supply modes of a permanent magnet synchronous motor (PMSM). The goal is to obtain a better efficiency for a hydraulic pump drive system. The machine (PMSM...
STATIC VOLTAGE SOURCE USE TO SUPPLY PARTIAL DISCHARGE MEASURING CIRCUITS AT INSTRUMENT TRANSFORMERS
The paper presents the implications of static voltage source use in the partial discharge (PD) measuring circuit at instrument transformers. The economic advantages deriving from the use of such sources must be correlate...