On the Implementation of FBD-Theory Concepts in the Control of Active DC-Traction Substations
Journal Title: ANALELE UNIVERSITATII DIN CRAIOVA - Seria Inginerie electrica - Year 2016, Vol 40, Issue 40
Abstract
This paper is focused on the transformation of a classical DC-traction substation with twelve-pulse uncontrolled rectifier into an active traction substation by adding a dedicated system for active filtering and regeneration called SISFREG. The connection of SISFREG to the ACside is performed in the primary of the traction transformer via a passive coupling filter and a recovery transformer, whereas an active separating circuit ensures the connection to the DC-traction line. The new functions added to the DCtraction substation lead to the increasing the energy efficiency of the whole system in both traction and braking regimes of the vehicles’ traction motors. The control of the current provided by the shunt active filter, which is the main component of SISFREG, is achieved in indirect mode, by means of the current upstream the point of common coupling. In the generation of the set current, the concepts of the Fryze-Buchholz-Depenbrock theory are implemented. Thus, an active current is always imposed at the power supply side and the current control loop guarantees almost sinusoidal current and global unity power factor. A complex Simulink model of the whole system, including facilities for energetic analysis, has been developed and the simulation results show good performances in both steady-state and dynamic regimes.
Authors and Affiliations
Mihaela Popescu, Alexandru Bitoleanu, Mircea Dobriceanu
Keywords
Related Articles
- EP ID EP262631
- DOI -
- Views 117
- Downloads 0
Shielding Effectiveness Measurement Using a DTEM Cell
This paper presents a shielding effectiveness evaluation for some metallic threads materials. The tests were performed using a non-standardized method in a dual transversal electromagnetic cell (DTEM). The materials’ shi...
Magneto-Thermal Model for Crimped Connections
In this paper numerical results coresponding to thermal regime of two types of superposed crimped connections has been obtained. The samples studied use copper wire crimped by two methods: the first method uses...
VALIDATION OF NUMERICAL INVERSION METHOD FOR LAPLACE TRANSFORM
Currently there are several numerical methods for inverting the Laplace transform (ILT) but not all of them are used in electrical engineering. The main difficulty regarding the electric circuits is, among others, to fin...
USING A LABVIEW AND FIELD POINT I/O MODULE FOR CATALYTIC ISOTOPIC EXCHANGE COLUMN CONTROL AND OPERATORS TRAINING
This paper presents the main advantages of using the programmable automation controller (PAC) and LabVIEW software in the operation of an isotopic exchange column which is part of ETRF (experimental tritium removal facil...
Modeling, Simulation and Practical Realization of the Spiral Inductors Used in Wireless Power Systems
With the increase of the number of devices powered and using wireless systems, the optimal design of such systems is necessary. The present study aims at determining the influence of parameters like distance between indu...