On the stress investigation at the edges of the fixed elastic semi-strip
Journal Title: Frattura ed Integrità Strutturale - Year 2016, Vol 10, Issue 38
Abstract
The stress state of the elastic fixed semi-strip with the regarding of the singularities at its edge is investigated in the article. The initial boundary problem is reduced to a vector boundary problem in the transformation’s domain by the use of integral Fourier transformation. The one-dimensional vector boundary problem is solved exactly with the help of matrix differential calculations and Green’s matrix apparatus. The problem’s solving was focused at the solving of the singular integral equation (SIE) with the two fixed singularities at the ends of the integration’s interval. The symbol of SIE was constructed and the generalized method of the SIE solving was applied. The stress’ distributions of the semi-strip are investigated.
Authors and Affiliations
M. Vaysfeld, O. Kryvyi, Z. Zhuravlova
Keywords
Related Articles
- EP ID EP159684
- DOI 10.3221/IGF-ESIS.38.01
- Views 64
- Downloads 0
Crack path in liquid metal embrittlement:experiments with steels and modeling
We review the recent experimental clarification of the fracture path in Liquid Metal Embrittlement with austenitic and martensitic steels. Using state of the art characterization tools (Focused Ion Beam and T...
Fatigue of weld ends under combined in- and out-of-phase multiaxial loading
Weld start and end points are fatigue failure sensitive locations. Their fatigue behaviour especially in thin sheet structures under multiaxial load conditions is not sufficiently explored so far. Therefore, a res...
Damage tolerance analysis of aircraft reinforced panels
This work is aimed at reproducing numerically a campaign of experimental tests performed for the development of reinforced panels, typically found in aircraft fuselage. The bonded reinforcements can significantly reduce...
Numerical simulation of dissimilar metal welding and its verification for determination of residual stresses
This paper summarizes the results of the through-thickness residual stress distributions on dissimilar metal weld (DMW) mock-up. DMWs, as welded joints between ferritic steels and either austenitic stainless stee...
Theorical study on mechanical properties of AZ31B Magnesium alloy Sheets under multiaxial loading
Numerical simulation by plastic deformation of the shaping processes currently has a large industrial interest. It allows you to shorten the time of design and construction related products and tools to analyze an...