Patch Antenna using Metamaterial Structure for Performance Specification
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 4
Abstract
In this work, The drawback of Patch Antenna was impedance bandwidth. For this purpose, Rectangular microstrip patch antenna loaded with metamaterial structure has been proposed for improving the bandwidth by using CST MICROWAVE STUDIO in this paper. The proposed antenna is designed at a height 3.2 from the ground plane by using CST MICROWAVE STUDIO. The bandwidth of Microstrip patch antenna is 12 .1MHz and return loss is -10.36 dB at a band.The bandwidth of desired antenna is increased up 63.7 MHz at 2.865 GHz. The return loss of proposed antenna is reduced up to - 27.48 dB at 2.865 GHz. This proposed design has small size, easy to fabricate and better directivity.
Authors and Affiliations
Rahul Rajoria
Keywords
Related Articles
- EP ID EP95390
- DOI -
- Views 83
- Downloads 0
Effect of Paratransit on Other Modes
Paratransit, or Dial-a-Ride, is an alternative mode of flexible passenger transportation that does not follow fixed routes or schedules. At their simplest they may consist of a taxi or auto rickshaw which has no d...
EXPERIMENTAL ANALYSIS ON THE EFFECT OF PROCESS PARAMETERS DURING CNC TURNING ON NYLON -6/6 USING TUNGSTEN CARBIDE TOOL
Quality and productivity of the machined parts are the main challenges of metal cutting industry during turning process. Therefore we should optimize and analyse the cutting parameters in such a way that the required su...
Effect of Aquo-Glycolic Media of Anodic Oxides on Zr
The surface of zircaloy-4 anodized at a constant current density of 4mA.cm ethylene glycol at a potential 0–187V, was characterized by means of surface science technique AFM with micro and nanostructures. It was found...
OPTIMIZATION AND ANALYSIS OF SLANT BED - A REVIEW
For the Mechanical Design Engineering we have face many complex problem of structural design, the solution of that type of problems are not possible with analytical methods. In such case we have to use the Numeric...
A Multi Response Optimization of Machining Parameters For Surface Roughness & MRR In High Speed CNC Turning of EN-24 Alloy Steel Using Response Surface Methodology
In Manufacturing sector Turning is the most common process used to remove material from cylindrical workpiece & produce smooth surface finish on the workpiece. In turning process Material removal rate & Su...