Performance of Open Core Gasifier with Briquette of different Crop Residues
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 5
Abstract
The open core gasifier was designed for loose agricultural residues like soybean briquette, pigeon pea briquette and mix briquette of (soybean + pigeon pea). In this experiment using air in gasification as supplementation mode there result found better as air suction mode there was less tar and gas quality. The gasifier performance was evaluated in terms of fuel consumption rate, calorific value of producer gas and gasification efficiency. Optimum value of specific gasification rate for gasification of briquette of mix biomass in open core gasifier reactor is 252 kg/h- m2 . The lower heating value of producer gas under the optimum operating conditions is about 4.10 - 4.57 (MJ/m3 ).The pigeon pea briquette has show the maximum temperature in oxidation zone was 1397 ˚C.which as higher the ash fusion temperature increase. The flame Temperature of soybean briquette, pigeon pea briquette, and mix briquette is 624, 634, and 619 ˚C respectively is attained at the burner. Gasification efficiency of soybean briquette, pigeon pea briquette and mix briquette of (soybean + pigeon pea). 56%, 51%, 53%, respectively. The gas produced from the briquette could used to replace the coal and wood.
Authors and Affiliations
M. S. Khardiwar*1
Keywords
Related Articles
- EP ID EP137969
- DOI -
- Views 64
- Downloads 0
Cement Stabilization of Laterite and Chikoko Soils Using Waste Rubber Fibre
This paper presents a study of cement stabilization of laterite and Chikoko soils using waste shredded rubber tyre chips as the reinforcement material at 5%, 10% and 15% fibre content by weight of soil. Tests cond...
REGRESSION MODELS OF DEATHS OCCURRED BY TUBERCULOSIS (TB) DISEASE IN THE SUDAN
This paper aims at studying the regression models that represent the relationship between the deaths that occurred by TB disease as dependent variable and the number of cases of TB. The study was conducted in the...
Thermal analysis of baffled shell and tube type EGR cooler for different types of tubes using CFD
Exhaust Gas Recirculation (EGR) technique using EGR cooler reduces the NOx content from the tailpipe emission of Diesel engines. Commercial computational fluid dynamics (CFD) code is used to solve and simulate the...
NUMERICAL SIMULATION OF TRUNCATED PYRAMIDAL CUPS OF AA1050-H18 ALLOY FABRICATED BY SINGLE POINT INCREMENTAL FORMING
The purpose of the present project work was to understand the formability of AA1050-H18 alloy to fabricate truncated pyramidal cups using single point incremental forming (SPIF) process. The finite element analysis has b...
Adaptive Traffic Signalization Model using Neuro-Fuzzy Controllers
Current traffic lights are pre-programmed and use daily signal timing schedules, which contribute to traffic congestion and delay. Thus, with the increase in the number of vehicles on road, need for adaptive signa...