Static assessment of brittle/ductile notched materials: an engineering approach based on the Theory of Critical Distances
Journal Title: Frattura ed Integrità Strutturale - Year 2014, Vol 8, Issue 30
Abstract
Engineering components often contain notches, keyways or other stress concentration features. These features raise the stress state in the vicinity of their apex which can lead to unexpected failure of the component. The Theory of Critical Distances has been proven to predict accurate results, but, conventionally, requires two key ingredients to be implemented: the first is a stress-distance curve which can be obtained relatively easily by means of any finite element software, the second is two additional material parameters which are determined by running appropriate experiments. In this novel reformulation, one of these additional parameters, namely the critical distance, can be determined a priori, allowing design engineers to assess components whilst reducing the time and cost of the design process. This paper investigates reformulating the Theory of Critical Distances to be based on two readily available material parameters, i.e., the Ultimate Tensile Strength and the Fracture Toughness. An experimental data base was compiled from the technical literature. The investigated samples had a range of stress concentration features including sharp V-notches to blunt U-notches, and a range of materials that exhibit brittle, quasi-brittle and ductile mechanical behaviour. Each data set was assessed and the prediction error was calculated. The failure predictions were on average 30% conservative, whilst the non-conservative predictions account for less than 10% of the tested data and less than 2% of the non-conservative error results exceed -20%. It is therefore recommended that a safety factor of at least 1.2 is used in the implementation of this version of the Theory of Critical Distances.
Authors and Affiliations
R. Louks, H. Askes, L. Susmel
Keywords
Related Articles
- EP ID EP105368
- DOI -
- Views 74
- Downloads 0
Wedge splitting test method: quantification of influence of glued marble plates by two-parameter fracture mechanics
In the present paper, the well-known wedge splitting test (WST) is applied on specimens with different geometries (S= 150, 200, 300 mm) and variants of the specimens’ configurations. K-calibration (B1) and T-stre...
Fatigue crack growth under remote and local compression – a state-of-the-art review
There is an ever increasing need for accurate understanding of the fatigue crack growth behaviour in major engineering materials and components. With the move towards more complex, probabilistic assessments, the...
Sulla stima di macro, micro e nano-durezza di materiali metallici mediante analisi elasto-plastiche agli elementi finiti
Il lavoro sintetizzato nel presente articolo si pone come obiettivo primario quello di investigare la possibilità di stimare, mediante un approccio elasto-plastico agli elementi finiti, la durezza dei materiali met...
Ratcheting of 316L stainless steel thin wire under tension-torsion loading
A series of cyclic tension-torsion tests under symmetric shear strain and asymmetric axial stress control in various loading paths are conducted on 100 μm-diameter 316L steel wires applying a micro tensiontorsion...
Effects of large amounts of hydrogen on the fatigue crack growth behavior of torsional prestrained carbon steel
The effects of large amounts of hydrogen on the fatigue crack growth properties of torsional prestrained ferritic–pearlitic low-carbon steel were investigated. Hydrogen-precharged specimens were produced by c...