Studies and Research on Friction, Friction Factor and Affecting Factors : A Review
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 10
Abstract
The friction and friction factors are very significant factors in flow through pipes, channels, heat exchangers . From the pumping cost point of view, minimum friction is desirable as it will decrease the energy loss. In the rotating components like axle-shaft arrangements, the friction and slip are important factors. In case of heat exchanger, the friction factor is important as the heat transfer depends on it. The research was also reported on effect of submerged vegetation on friction for river. The friction coefficient was a function of flow depth and velocity. Also various models were suggested by investigators to predict friction coefficient based on their research related to factors affecting the friction coefficient and the nature and gravity of their effect on friction
Authors and Affiliations
Sunil J. Kulkarni
RESEARCH ON OPTIMIZATION MODEL OF THE LINKAGE TOU TARIFF UNDER THE MODE OF CHINA ELECTRIC POWER SYSTEM
Under China's current power system mode, the current TOU tariff is mostly considered and formulated from the sale side or the generation side, TOU tariff of the linkage in generation side and the sale side has not...
Study and Analysis of IEEE 802.15.4 Media Access Control (MAC)
The Low rate wireless Personal Area Networks (LR-WPAN) allows the optional use of a superframe structure. The superframe is bounded by network beacons and is divided into 16 equally sized slots. The superframe ca...
Artificial Neural Network Approach for Economic Load Dispatch for varying Loads
The objective of the present paper is to know the distribution of load out of the total load arriving upon the generating plant for economic load dispatch. The plant consists of ten generating units each 250 MW. T...
PARAMETRIC STUDY OF SKEW ANGLE ON BOX GIRDER BRIDGE DECK
Box girder bridge deck, is the most common type of bridges in world and India, it consists of several Slab or girders. The span in the direction of the roadway and connected across their tops and bottoms by a thin contin...
A PRE-FLOW PUSH ALGORITHM TO GENERALIZED MAXIMUM FLOW PROBLEM
This work presents an algorithm for the generalized maximum flow problem. First, we describe the traditional maximum flow problem. Pre-flow Push algorithms work in a more localized manner than the Ford-Fulkerson m...