Study of the conditions of fracture at explosive compaction of powders
Journal Title: Frattura ed Integrità Strutturale - Year 2013, Vol 7, Issue 24
Abstract
Joint theoretical and experimental investigations have allowed to realize an approach with use of mathematical and physical modeling of processes of a shock wave loading of powder materials.In order to gain a better insight into the effect of loading conditions and, in particular, to study the effect of detonation velocity, explosive thickness, and explosion pressure on the properties of the final sample, we numerically solved the problem about powder compaction in the axisymmetric case.The performed analysis shows that an increase in the decay time of the pressure applied to the sample due to an increase of the explosive thickness or the external loading causes no shrinkage of the destructed region at a fixed propagation velocity of the detonation wave. Simultaneously, a decrease in the propagation velocity of the detonation wave results in an appreciable shrinkage of this region.
Authors and Affiliations
Andrey E. Buzyurkin, Evgeny I. Kraus, Yaroslav L. Lukyanov
Keywords
Related Articles
- EP ID EP135665
- DOI 10.3221/IGF-ESIS.24.11
- Views 53
- Downloads 0
A coupled interface-body nonlocal damage model for the analysis of FRP strengthening detachment from cohesive material
In the present work, a new model of the FRP-concrete or masonry interface, which accounts for the coupling occurring between the degradation of the cohesive material and the FRP detachment, is presented; in particular, a...
Effective properties of a new auxetic triangular lattice:an analytical approach
In this article we propose a new auxetic periodic lattice with negative Poisson's ratio which tends tothe limit ν=-1 under particular conditions. We have studied its generation and kinematic, and we give a fulldesc...
Research of the effectiveness of mechanical testing methods with analysis of features of destructions and temperature effects
In this paper is carried out the comparative analysis of effectiveness of test methods of determination of stiffness and strength properties of highly filled unidirectional fiberglass (Direct "E" roving 0.7 - ortho...
Fatigue strength of SS400 steel under non-proportional loading
This study discusses fatigue properties of low carbon steel, type SS400 steel, under non-proportional loading. Multiaxial fatigue tests under proportional and non-proportional loading conditions with various stres...
Stress triaxiality influence on damaging micromechanisms in a pearlitic ductile cast iron
In the last decades, damaging micromechanisms in ductile cast irons (DCIs) have been widely investigated, considering both the matrix microstructure and the loading conditions influence. Considering the graphite...