Study of the influence between the strength of antibending of working rolls on the widening during hot rolling of thin sheet metal
Journal Title: Frattura ed Integrità Strutturale - Year 2016, Vol 10, Issue 37
Abstract
Based on the variation principle of Jourdan was developed a mathematical model of the process of widening freely in hot rolling of thin sheet metal. The principle applies to rigid-plastic materials and for the cinematically admissible area of speeds. The developed model allows to study the distribution of the widening on the length of the deformation zone depending on the parameters of the rolling process and sheet metal. Results are obtained, characterizing the size of the widening and effectiveness of the process control on tension at the entrance and exit from the stand. The widening is dependent on the strength of anti bending.
Authors and Affiliations
U. Muhin, S. Belskij, T. Koynov
Keywords
Related Articles
- EP ID EP149241
- DOI 10.3221/IGF-ESIS.37.42
- Views 41
- Downloads 0
Multi-scale approach for the analysis of the stress fields at a contact edge in fretting fatigue conditions with a crack analogue approach
This paper describes a novel method to model the stress gradient effect in fretting-fatigue. The analysis of the mechanical fields in the proximity of the contact edges allows to extract nonlocal intensity factors...
Crack initiation and propagation on the polymeric material ABS (Acrylonitrile Butadiene Styrene), under ultrasonic fatigue testing
Crack initiation and propagation have been investigated on the polymeric material ABS (Acrylonitrile Butadiene Styrene), under ultrasonic fatigue testing. Three controlled actions were implemented in order to...
Effect of the model’s geometry in fretting fatigue life prediction
This paper analyses the influence that the type of geometry used to obtain the stress/strain fields in a cylindrical contact has on fretting fatigue life predictions. In addition, this work considers the effect th...
Interpreting experimental fracture toughness results of quasi-brittle natural materials through multi-parameter approaches
Natural stones like marbles are often employed as façade panels to externally cover buildings. These natural materials tend to exhibit a quasi-brittle nonlinear fracture behaviour which, conversely to concrete co...
Inter-laminar shear stress in hybrid CFRP/austenitic steel
Bolted joints are the most common solution for joining composite components in aerospace structures. Critical structures such as wing to fuselage joints, or flight control surface fittings use bolted joining tech...