Numerical analysis of interaction between a model tunnel lining and non-cohesive soil
Journal Title: Bulletin of the Military University of Technology - Year 2019, Vol 68, Issue 1
Abstract
The paper presents an analysis and assessment of an interaction between a model tunnel lining and surrounding non-cohesive soil. The analysis was conducted with numerical simulations using the author’s program based on an algorithm of the discrete element method. Previously calibrated numerical model was used in the calculations. Calibration was based on comparison of the construction deformations observed in the laboratory tests and during the simulation. Numerous simulations, performed in the calibrated numerical model, included calculations for a flexible and rigid construction of the lining. The tunnel construction loads, stress distribution in the surrounding soil, and soil particles’ displacements were investigated. Analyses were conducted in two variants — when only soil weight is acting on the tunnel construction and when the external load transmitted from the surface is present. Also two variants of the backfill height were investigated — they were equal to one and two diameters of the tunnel. The values of tunnel loads, which were numerically calculated, were compared with the corresponding values, calculated by the Hewett’s method. It is shown that distribution of tunnel loads and stresses in the surrounding soil is strongly linked with the tunnel construction stiffness, thus it can be significantly different from standard load situations for such constructions. Keywords: civil engineering, discrete element method, tunnel lining<br/><br/>
Authors and Affiliations
Paweł Szklennik
Zastosowanie struktur przestrzennych emiterów metalicznych do wytwarzania gradientowych promienników podczerwieni
Badania porównawcze kamer termowizyjnych, służących do obserwacji sceny termalnej, sprowadzają się zwykle do obserwacji wzorcowych różnic temperatury lub wzorcowego kontrastu termicznego. Standardowe badania wykonuje się...
Pomiar chaotycznego tworzenia się pęcherzyków gazu z zastosowaniem programu LabVIEW
Zjawisko chaosu deterministycznego występuje wskutek zmian parametrów układu. W badaniach poszukiwano bifurkacji – punktów utraty stabilności układu, podczas tworzenia się pęcherzyków gazu. Specjalnie utworzone stanowisk...
Simple Evaluation of Load-Carrying Capacity of Multi-Span Folding Bridges based on Floating Supports
[b]Abstract[/b]. The papers covers simple evaluation of load-carrying capacity of multi-span folding bridges based on floating supports. Combined bridges built in this approach, could be used as a temporary crossing. The...
Dynamic relaxation method in analysis of reinforced concrete bent elements
The paper presents a method for the analysis of nonlinear behaviour of reinforced concrete bent elements subjected to short-term static load. The considerations in the range of modelling of deformation processes of reinf...
Kompozyty ciekłokrystaliczne do punktowych pomiarów temperatury
Zastosowanie cholesterycznych ciekłych kryształów i kompozytów je zawierających do wizualizacji pól cieplnych i pomiaru temperatury jest dobrze znane. Niezależnie od niedogodności, jakimi są ograniczona precyzja i adhezj...