Ocena wpływu rodzaju napełniacza na odporność erozyjną powłok epoksydowych
Journal Title: Tribologia - Year 2010, Vol 232, Issue 4
Abstract
Authors and Affiliations
Danuta Kotnarowska
Keywords
Related Articles
- EP ID EP273599
- DOI -
- Views 48
- Downloads 0
OPTIMIZATION OF THE GEOMETRICAL PARAMETERS OF TOOTHED GEARS IN THE ASPECT OF CONTACT STRESS MINIMIZATION
Gear wheels are the basic elements of each gear transmission, which builds the power transmission system of a working machine or any automotive vehicle. Gear wheels are exposed to the contact stress acting on a tooth fac...
LABORATORY TESTS OF THE USE OF BELT CONVEYOR ELEMENTS FOR MOULDING SANDS
The article presents the results of research on the wear of belt conveyors’ elements made of various materials. For the purpose of the experiment, a test stand was built, reflecting the real working conditions of the con...
THE USE OF PLATE SPRINGS FOR PRELOADING OF A SYSTEM OF TAPERED ROLLER BEARINGS OF A WIND TURBINE GEARBOX
The use of preloaded tapered roller bearings in wind turbine drive systems allows a transfer of load in the case of high variations of axial forces. The examined bearing system, a modification of a current design, consis...
FRICTION, WEAR AND MECHANICAL PROPERTIES OF SILICONE COMPOSITES CONTAINING SURFACE MODIFIED MINERAL FILLERS
Products based on silicone rubber exhibit many unique properties. High resistance to ageing, the ability to be used in a wide range of temperature, limited swelling by oils and greases, and very good physiological compat...
ASSESSING THE PROPERTIES OF SINGLE AND MULTI-LAYER DLC COATINGS
The paper deals with the testing of single-layer DLC coatings (a:C:H:W, TiN/a:C:H:W, and CrN/a:C:H:W). The coatings were deposited on Co-Cr-Mo (BIODUR CCM Plus alloy) specimens using the PVD and PACVD processes. The topo...