Optimal Control of Micro-grid (MG) to Improve Voltage Profile Including Combined Heat and Power System
Journal Title: روش های هوشمند در صنعت برق - Year 2018, Vol 9, Issue 36
Abstract
Usually, in the studies of optimal control for the micro-grid with combined heat and power (CHP), economic and environmental goals have been raised. In these studies, the optimization of control devices and compensators that are aimed at improving the technical aspects of micro-grid has not been considered. Therefore, in this paper, these goals are considered simultaneously. In this paper the shunt capacitor, shunt reactor, static var compensator, load ratio control transformer, step voltage regulator and power generation of DGs are investigated as control variables with the aim of considering costs, losses and voltage profile improvement. The case under study is a distribution test system including 22 buses, which consists of photovoltaic and fuel cell. All network data is extracted from a real system. As a result, the system can completely represent a real system. In order to complete the study of the system, the emissions of fuel cells are considered in the objective function. The efficiency and output electrical and thermal power of the fuel cell are considered related to part load ratio as a real standard model introduced in previous studies.
Authors and Affiliations
Hesam Rahbarimagham
Keywords
Related Articles
- EP ID EP569357
- DOI -
- Views 71
- Downloads 0
A New Control System for a Dual Stator-Winding Cage Rotor Induction Generator in Direct Grid Connected Condition with Maximum Power point tracking of Wind Turbine
In this research a new control system for MPPT in a grid connected three-phase squirrel cage induction wind turbo-generator is presented. This generator is consisted of two Isolated three-phase windings. The first windin...
Silica photonic crystal fiber structure in order to simplify the process of making them
In this research, a new structure of photonic crystal fibers(PCFs) will be proposed,in which instead of using the aire- holes in the cladding region, the flourine(2%) doped solid silica rods in order to reduce the proble...
Improvement of Networked Control Systems Performance Using a New Encryption Algorithm
Networked control systems are control systems which controllers and plants are connected via telecommunication network. One of the most important challenges in networked control systems is the problem of network time del...
Design and Simulation of a Dual-Band Filtering Power Divider Using Stepped Impedance Resonators and present a novel method for generation of transmission zeros
In this article, a compact power divider with dual-band frequency response, designed and simulated using dual-mode stepped impedance resonators (SIRs) for WLAN application. The resonant frequencies of the proposed steppe...
Output Feedback Controller Design for Multi-Agent Systems with Dynamic Heterogeneity in the Presence of Parameter Uncertainty and Exogenous Disturbances
This paper is concerned with network based leader following consensus for a distributed multi agent system with interval time varying delays in the presence of uncertainty and disturbances. A network based consensus cont...