ОПТИМІЗАЦІЯ СКЛАДУ ЦЕМЕНТОҐРУНТУ З МЕТОЮ ПІДВИЩЕННЯ ЙОГО ФІЗИКО-МЕХАНІЧНИХ ПОКАЗНИКІВ

Abstract

In order to ensure long-term durability and increase the bearing capacity of clay soils, it is recommended to strengthen them with binder materials. For this purpose, lime and cement are used as binder materials. In order to ensure the reliability of the base, it is recomend to compact the soil to the maximum value of the soil skeleton density at humidity, which corresponds to the maximum number of bound water. The main indicators of good soil compaction (maximum soil particle density, which corresponds to the optimal soil moisture content) were determined by laboratory tests on Proctor’s test (ASTM D698-91). For further study of the influence of binder materials on the physical and mechanical parameters of the soil, the tests for the determination of strength on the compression of soil samples at the age of 14 and 28 days were carried out. It is proved that such material has a higher strength and can withstand 14 cycles of freezing and thawing without destroying the structure and some preservation of the strength, due to the creation of high-alumina environment in which the strong water-resistant minerals are synthesized. On the basis of these data, the optimal composition of soil cement was selected.

Authors and Affiliations

S. Solodky, N. Topylko, Yu. Turba, O. Hrymak, Y. Novytskjy

Keywords

Related Articles

EXPERIMENTAL RESEARCH OF LAMINATED GLASS COLUMN FOR CENTRAL COMPRESSON

The possibility of using structural building structures from a glass triplex is explored. Are presented the experimental tests of glass multilayer columns with vertical arrangement of layers. The results of experiments a...

Аналіз систем утеплення будівель з врахуванням життєвого циклу теплової ізоляції

Each increase of energy tariffs actualizes the problem of insulation of buildings in order to reduce heating costs. This raises the question of choice of insulating material. In the article is considered the actual quest...

РЕЗУЛЬТАТИ НАТУРНИХ ВИПРОБУВАНЬ КОСИХ В ПЛАНІ ЗАЛІЗОБЕТОННИХ БАЛКОВИХ ПРОЛЬОТНИХ БУДОВ АВТОДОРОЖНЬОГО МОСТА

Reinforced concrete bridges with skew intersection of obstacles (the skew in the plan bridges) with beam cross-ribbed span structures have characteristic constructive differences in the layout the floor beam system compa...

Визначення інтенсивності турбулентності потоків з великомасштабними вихорами на основі геометричного та кінематичного аналізу макроструктури

In connection with the standards harmonization with the EU it is necessary to take into account turbulence intensity in rooms. The basic approaches are high-cost and time consuming experimental researches in special labo...

ON ANCHORING OF THE LONGITUDINAL TENSILE REINFORCEMENT IN REINFORCED CONCRETE BEAMS WITHOUT PRE-STRESSING

The character of oblique cracking is significantly influenced by the method and reliability of anchoring of the longitudinal tensile reinforcement on the hinge support beams. In many experimental researches the lack of a...

Download PDF file
  • EP ID EP284771
  • DOI -
  • Views 97
  • Downloads 0

How To Cite

S. Solodky, N. Topylko, Yu. Turba, O. Hrymak, Y. Novytskjy (2017). ОПТИМІЗАЦІЯ СКЛАДУ ЦЕМЕНТОҐРУНТУ З МЕТОЮ ПІДВИЩЕННЯ ЙОГО ФІЗИКО-МЕХАНІЧНИХ ПОКАЗНИКІВ. Вісник Національного університету "Львівська політехніка". Серія "Теорія та практика будівництва", 0(877), 199-205. https://europub.co.uk/articles/-A-284771