ORTHOGONAL SPUR-BEVEL TRANSMISSIONS
Journal Title: Проблеми тертя та зношування - Year 2017, Vol 75, Issue
Abstract
Half-involut orthogonal spur-bevel transmissions formed by involute spur gear wheel, have increased sensitivity to errors of manufacturing and assembling in the case of a linear touched links. In the case of contact localization, with the use of general producing surface, strongly marked point contact restricts the carrying capacity of the transmission. The article considers possibility of spur-bevel transmission creation based on spur gear wheel with flat side surfaces of the teeth. Some characteristics of transmission like geometrical parameters, line of contact, conditions of undercutting and the attributes of the localized contact there are studied.
Authors and Affiliations
A. M. KAPLUN, P. L. NOSKO, P. V. FIL, O. V. BASHTA, N. D. MAZUR, A. A. BUGAIOVA
Keywords
Related Articles
- EP ID EP324506
- DOI -
- Views 42
- Downloads 0
ACTIVE PROTECTION AGAINST CORROSION
The problem of protection of technological equipment from corrosion is outlined. Possible measures of protection against wandering currents and types of protection against corrosion have been found out. The first is aime...
INVESTIGATION OF THE INFLUENCE OF TECHNOLOGICAL PARAMETERS OF DISCRETE-TEXTURED OIL-BASED SURFACES FORMATION ON THE TRIBOSYS-TEMS FRETTING RESISTANCE
A study was carried out to determine the effectiveness of increasing the fretting resistance of tribosystems by the formation of discrete-textured oil-based surfaces in the form of regularly located microcavities. Phenom...
ABRASIVE INCREASE RESISTANCE STEEL 45 COMBINED COATINGS
The influence of the chemical composition of the electrode materials and modes of electric-alloying of steel 45 on its durability to abrasion wear is investigated. Established that maximum durability have coverage (Ti, C...
A REVIEW OF STUDIES OF TITANIUM ALLOY Ti-6Al-4V SURFACE ENGINEERING METHODS
The paper reviews researches on increasing the wear resistance of double-phase titanium alloy Ti-6Al-4V. The researches were carried out for various friction conditions – pin-on-disk, point contacts, fretting wear etc. I...
FRICTION AND WEAR IN LUBRICATION METAL-CONTAINING POLYMER BASED ON PHENYLONE FILLED BRONZE
The article is devoted to the search of rational compositions for bearings instead of scarce metals and alloys. It is shown that using of metal-containing polymer based on aromatic polyamide phenylone and bronze not only...