ACTIVE PROTECTION AGAINST CORROSION
Journal Title: Проблеми тертя та зношування - Year 2018, Vol 79, Issue
Abstract
The problem of protection of technological equipment from corrosion is outlined. Possible measures of protection against wandering currents and types of protection against corrosion have been found out. The first is aimed at reducing wandering currents in the ground. The sec-ond solves the issues related to preventing the penetration of these currents into technological equipment. There are three types of protection against corrosion: structural, passive and ac-tive. An active type of protection against corrosion, in which tread protection is used, is studied in more detail. The disadvantage of tread protection is that the replacement of the protectors requires not only the emptying of the tank, but also its preparation for fireworks, cleaning and degassing, which significantly increases the cost of such a process. Therefore, the implementa-tion of tread protection without fireworks in the tank is investigated, which will allow quick replacement of protectors and introduce protective coatings on existing tanks. Proposed meth-ods of calculation of tread protection against corrosion and their efficiency from commission-ing. During the calculation of tread protection, determine the number of treads and their timing depending on the transition resistance of the bottom isolation and the specific resistance of the soil, provided that the protective tensile strength of the tread tank is reached. This technique allows you to determine the final number of treads and their service life in years. Protective protection can be used effectively and instead of lightning protection grounding. The effec-tiveness of the tread protection located in the tank is estimated by the difference in the poten-tial of the "reservoir-electrolyte" with the copper-sulfate electrode, which is lowered into the reservoir. The requirement is defined, which ensures effective protection of the tread. In order to evaluate the effectiveness of the use of tread protection against corrosion of technological equipment, a scheme of interconnection of the object of evaluation of efficiency with the ob-ject being serviced has been developed. The use of this scheme allows us to assert that tread protection increases the efficiency of operation of air fuel supply facilities due to the impact on the system and the operational use of such devices
Authors and Affiliations
S. O. PUZIK, V. I. KURILOV, O. S. PUZIK, V. F. OPANASENKO, A. V. VARENYK
Keywords
Related Articles
- EP ID EP366598
- DOI -
- Views 99
- Downloads 0
INTENSIFICATION OF THE FORCED COOLING OF THE FRICTION PAIRS OF THE BAND-BLOCK BRAKES OF DRAW-WORKS
The friction pairs of the band-block brake are washed by longitudinal and transverse air flows during forced cooling at electric thermal mechanical friction. Air flow affects at the longitudinal circulation of the air i...
ENERGYLOADING OF THE FRICTION PAIRS OF THE BAND-BLOCK BRAKE DURING AIR-LIQUID COOLING IN THE DRAWWORK
The rate of descent of the drill string in the wellbore depends on their weight and the effectiveness of the mechanical and the hydrodynamic brake. In this case the main loading falls on the friction units of band-block...
TO THE QUESTION OF CALCULATION AND DESIGN OF DIFFERENT TYPES OF DISKS FOR THE SUBJECTS OF MOTOR VEHICLES
In disk-block brakes use both solid and self-ventilated discs with a developed system of venti-lation holes and channels in the body of the disc with polished and matte its side surfaces. These surfaces interact with hig...
MODELING AND STUDY OF THE CYLINDER REDUCER WEAR FOR MOBILE ROBOT
At the design stage, attention is paid to the executive system, which is the main mechanical component of the robotic system. A malfunction or incorrect operation of one link of a me-chanical system leads to a malfunctio...
The deformation mode of the brake pulleys of the draw-works at multicells origin and development of microcracks
We’ve Illustrated the deformation mode of the brake pulleys of the draw-works at multicellsorigin and development of microcracks, based on the analysis of factors and dissemination offractals, acting on the working surfa...