Other Types of Equatorial Spherical Hypocycloid Automatic Machine
Journal Title: RECENT - Year 2011, Vol 12, Issue 32
Abstract
Equatorial spherical hypocycloid automatic machine, under equatorial and over equatorial was already identified as possible. Researches conducted so far by the author have focused exclusively on the equatorial spherical hypocycloid automatic machines (AHSe), particularly those with a 2:1 ratio between the numbers of teeth of the fixed plane central gear and the satellite gear. This research has, as results, two patent applications registered at OSIM. AHSe with one satellite and two or more trajectory generating points placed “externally” are similar as operation and construction of those with trajectory generating points placed “inside”. Location “on the outside” of the generating points may be favourable in terms of access to them and certainly determines an increase of distance between two neighbours slide blocks’ in conditions of the same angular space between them.
Authors and Affiliations
Răzvan RĂCEU
Keywords
Related Articles
- EP ID EP129569
- DOI -
- Views 90
- Downloads 0
Studies on the Forces Developed in a Rehabilitation Equipment Slider
The paper presents the experiments performed to determine the forces developed by a drive system of rehabilitation equipment. As actuator is used a pneumatic muscle, which works on a spring principle - increases its diam...
The Computation of Rigidity for the Step Parts, Cut on Lathe
In the classical strategy of the dimensional directing of the machining processes the particular stress is laid upon the machining agent (programmer), while the adaptive management is based on the interpretation of the i...
About the Independent Sets of Periodically Meshing Teeth in Gear Drives - Part II
This article relies on the concept of independent sets of meshing teeth, which affect numerous performance parameters of gear drives. The influence of these contact sets on the noise- and vibration activity, as well as t...
Surface Roughness Investigation of a Reinforced Polymer Composite
The influence of cutting speed and feed rate during turning on the surface roughness of a glass fiber polymer composite (Ertalon 66 GF-30) was experimentally investigated. Test specimens in the form of bars and a P20 cem...
Gap Determination for Clinker Preparation Kilns
Cement kilns are the heart of the cement production process; they are used for the pyroprocessing stage of manufacture of Portland and other types of hydraulic cement. Their capacities usually define the capacity of the...