Particle Swarm Optimization Algorithm for Leakage Power Reduction in VLSI Circuits
Journal Title: International Journal of Electronics and Telecommunications - Year 2016, Vol 62, Issue 2
Abstract
Leakage power is the dominant source of power dissipation in nanometer technology. As per the International Technology Roadmap for Semiconductors (ITRS) static power dominates dynamic power with the advancement in technology. One of the well-known techniques used for leakage reduction is Input Vector Control (IVC). Due to stacking effect in IVC, it gives less leakage for the Minimum Leakage Vector (MLV) applied at inputs of test circuit. This paper introduces Particle Swarm Optimization (PSO) algorithm to the field of VLSI to find minimum leakage vector. Another optimization algorithm called Genetic algorithm (GA) is also implemented to search MLV and compared with PSO in terms of number of iterations. The proposed approach is validated by simulating few test circuits. Both GA and PSO algorithms are implemented in Verilog HDL and the simulations are carried out using Xilinx 9.2i. From the simulation results it is found that PSO based approach is best in finding MLV compared to Genetic based implementation as PSO technique uses less runtime compared to GA. To the best of the author’s knowledge PSO algorithm is used in IVC technique to optimize power for the first time and it is quite successful in searching MLV.
Authors and Affiliations
V. Leela Rani, M. Madhavi Latha
Heart-rate Monitoring System Design and Analysis Using a Nios II Soft-core Processor
The heart rate of a person is able to tell whether they are healthy. A heart-rate monitoring device is able to measure or record the heart rate of a person in real time, whether it is an electrocardiogram (ECG) or a phot...
A Minimum-Spanning-Tree-Inspired Algorithm for Channel Assignment in 802.11 Networks
Channel assignment in 2.4 GHz band of 802.11 standard is still important issue as a lot of 2.4 GHz devices are in use. This band offers only three non-overlapping channels, so in crowded environment users can suffer fro...
Determination of the Material Relative Permittivity in the UHF Band by Using T and Modified Ring Resonators
The complete methodology of designing T- and modified ring resonators in the UHF band are presented in the paper. On the basis of proposed algorithms, the dedicated software tool has been elaborated in order to determine...
Comparison of Indoor/Outdoor, RSSI-Based Positioning Using 433, 868 or 2400 MHz ISM Bands
This paper compares accuracy of indoor positioning systems using one of three selected ISM bands: 433, 868 or 2400 MHz. Positioning is based on Received Signal Strength Indication (RSSI), received by majority of ISM RF m...
The Influence of Sintering Conditions on the Inkjet Printed Paths Resistance
The sintering of elements performed with the inkjet printing technique is one of the stages of flexible printed circuit manufacturing process. It is a crucial factor to determining the printed paths conductivity playing...